This commit adds support for using the physical insert-button. First
click toggles insert mode and subsequent clicks toggle back and forth
between replace and insert mode.
Closes#19224
Release Notes:
- Added support for using the insert button for vim_mode.
Part of https://github.com/zed-industries/zed/issues/19239
Overall, this hardcoding approach has to stop and Zed better show some
notification/modal that proposes to select a primary language server,
when launching with the language that has no such settings.
Release Notes:
- Fixed Astro LSP interactions
Supersedes https://github.com/zed-industries/zed/pull/19166
TODO:
- [x] Update basic zed paths
- [x] update create_state_directory
- [x] Use this with `NodeRuntime`
- [x] Add server settings
- [x] Add an 'open server settings command'
- [x] Make sure it all works
Release Notes:
- Updated the actions `zed::OpenLocalSettings` and `zed::OpenLocalTasks`
to `zed::OpenProjectSettings` and `zed::OpenProjectTasks`.
---------
Co-authored-by: Conrad <conrad@zed.dev>
Co-authored-by: Richard <richard@zed.dev>
This PR changes the SSH modal design so its more keyboard
navigation-friendly and adds the server nickname feature.
Release Notes:
- N/A
---------
Co-authored-by: Danilo <danilo@zed.dev>
Co-authored-by: Danilo Leal <67129314+danilo-leal@users.noreply.github.com>
Currently terminal.cursor_shape uses `underline` and `cursor_shape` uses
`underscore`.
This standardizes them so they use the same settings value.
I think `underline` is the more common term and it matches the
terminology used by VSCode, Alacritty, iTerm, etc.
Note the protobuf enum `CursorShape::CursorUnderscore` remains
unchanged.
See also:
- https://github.com/zed-industries/zed/pull/18530
- https://github.com/zed-industries/zed/pull/17572
Release Notes:
- Settings: rename one `cursor_shape` from `underscore` to `underline`
(breaking change).
Closes#7417
Release Notes:
- Added basic support for Alacritty's [vi
mode](https://github.com/alacritty/alacritty/blob/master/docs/features.md#vi-mode)
to the built-in terminal (which is using Alacritty under the hood.) The
vi mode can be activated with `ctrl-shift-space` and then supports some
basic motions to navigate through the terminal's scrollback buffer.
## Details
Leverages existing selection functionality from mouse_drag and the
ViMotion API of alacritty to add basic vi motions in the terminal.
Please note, this is only basic functionality (move, select, and yank to
system clipboard) and not a fully functional vim environment (e.g.
search, configurable keybindings, and paste). I figured this would be an
interim solution to the long term, more fleshed out, solution proposed
by @mrnugget.
Ctrl+Shift+Space to enter Vi mode while in the terminal (Same default
binding in alacritty)
I've been running with direct direnv loading for a while now and haven't
experienced any significant issues other than #18473. Making it default
would make direnv integration more reliable and consistent. I've also
updated the docs a bit to ensure that they represent current status of
direnv integration
Release Notes:
- Made direnv integration use direct (`direnv export json`) mode by
default instead of relying on a shell hook, improving consistency and
reliability of direnv detection
This builds on top of @Yevgen's #15840 and combines it with the settings
names introduced in #17572.
Closes#4731.
Release Notes:
- Added a setting for the terminal's default cursor shape. The setting
is `{"terminal": {"cursor_shape": "block"}}``. Possible values: `block`,
`bar`, `hollow`, `underline`.
Demo:
https://github.com/user-attachments/assets/96ed28c2-c222-436b-80cb-7cd63eeb47dd
Fixes some missing shortcuts from Tooltips like the project search,
buffer search, quick action bar, ....
https://github.com/user-attachments/assets/d3a0160a-8d6e-4ddc-bf82-1fabeca42d59
This should hopefully help new users learn and discover some nice
keyboard shortcuts
Release Notes:
- Display keyboard shortcuts inside tooltips in the project search,
buffer search etc.
Closes#6822
Updates #5142
Release Notes:
- Added new fold actions to toggle folds (`cmd-k cmd-l`), fold every
fold (`cmd-k cmd-0`) unfold every fold (`cmd-k cmd-j`) to fold
recursively (`cmd-k cmd-[`) and unfold recursively (`cmd-k cmd-]`).
- vim: Added `za` to toggle fold under cursor.
- vim: Added `zO`/`zC`/`zA` to open, close and toggle folds recursively
(and fixed `zc` to not recurse into selections).
- vim: Added `zR`/`zM` to open/close all folds in the buffer.
Release Notes:
- Fixed overriding the path of a language server binary for all language
servers. `{"lsp":{"<lsp-name>":{"binary":{"path": "_"}}}}` will now work
for all language servers including those defined by extensions.
- (breaking change) To disable finding lsp adapters in your path, you
must now specify
`{"lsp":{"<lsp-name>":{"binary":{"ignore_system_version": true}}}}`.
Previously this was `{"lsp":{"<lsp-name>":{"binary":{"path_lookup":
false}}}}`. Note that this setting still does not apply to extensions.
- Removed automatic reinstallation of language servers. (It mostly
didn't work)
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
Release Notes:
- (Potentially breaking change) Zed will now use the node installed on
your $PATH (if it is more recent than v18) instead of downloading its
own. You can disable the new behavior with `{"node":
{"disable_path_lookup": true}}` in your settings. We do not yet use
system/project-local node_modules.
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
* [x] put this slash command behind a feature flag until we release
embedding access to the general population
* [x] choose a name for this slash command and name the rust module to
match
Release Notes:
- N/A
---------
Co-authored-by: Jason <jason@zed.dev>
Co-authored-by: Richard <richard@zed.dev>
Co-authored-by: Jason Mancuso <7891333+jvmncs@users.noreply.github.com>
Co-authored-by: Richard Feldman <oss@rtfeldman.com>
Release Notes:
- Added a new `assistant.inline_alternatives` setting to configure
additional models that will be used to perform inline assists in
parallel.
---------
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Roy <roy@anthropic.com>
Co-authored-by: Adam <wolffiex@anthropic.com>
Release Notes:
- Added Diagnostic information to inline assistant. This enables users
to just say "Fix this" and have the model know what the errors are.
Some notes:
- You can put the cursor on the start or end line with triple backticks,
it doesn't actually have to be inside the block.
- Placing the cursor outside of a code block does nothing.
- Code blocks are determined by counting triple backticks pairs from
either start or end of buffer, and nothing else.
- If you manually select something, the selection takes precedence over
any code blocks.
Release Notes:
- Added the ability to copy surrounding code blocks in the assistant
panel into the clipboard, or inserting them directly into the editor,
without manually selecting. Place cursor anywhere in a code block
(marked by triple backticks) and use the `assistant::CopyCode` action
(`cmd-k c` / `ctrl-k c`) to copy to the clipboard, or the
`assistant::InsertIntoEditor` action (`cmd-<` / `ctrl-<`) to insert into
editor.
---------
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
Co-authored-by: Bennet <bennet@zed.dev>
This PR adds the ability to display backgrounds for inlay hints within
the editor.
This is controlled by the new `inlay_hints.show_background` setting.
This setting defaults to `false`.
To enable the setting, add the following to your `settings.json`:
```json
{
"inlay_hints": {
"enabled": true,
"show_background": true
}
}
```
When enabled, the inlay hint backgrounds will use the `hint.background`
color from the theme.
| Disabled | Enabled |
|
--------------------------------------------------------------------------------------------------------------------------------------------------
|
--------------------------------------------------------------------------------------------------------------------------------------------------
|
| <img width="1624" alt="Screenshot 2024-09-17 at 4 21 53 PM"
src="https://github.com/user-attachments/assets/5534d09b-1e22-4c6f-9d82-314796ed7d22">
| <img width="1624" alt="Screenshot 2024-09-17 at 4 21 43 PM"
src="https://github.com/user-attachments/assets/6ec58cde-6115-4db4-be95-97c5f2f54b2d">
|
Related issues:
- #12485
- #17392
Release Notes:
- Added an `inlay_hints.show_background` setting to allow displaying
backgrounds for inlay hints in the editor.
- This setting defaults to `false`.
- If enabled, the inlay hint backgrounds will use the `hint.background`
color from the theme.
This PR adds a keybinding for the `editor: rewrap` command.
It is bound to `alt-q`, by default. In Vim mode, it is bound to `g q`.
Release Notes:
- N/A
This fixes the regression introduced here:
https://github.com/zed-industries/zed/pull/17572#issuecomment-2355632615
Essentially: instead of always setting the value when saving settings,
we don't set it by default, but fall back to the default value if it's
not set.
That fixes Vim mode's cursor being overwritten when settings change.
Release Notes:
- N/A
Release Notes:
- Add Python venv activation support for Windows and PowerShell
Additional:
I discovered a related bug on my Windows system. When first opening the
project, it fails to detect the virtual environment folder `.venv`.
After expanding the .venv folder in the Project Panel, it then becomes
able to detect the virtual environment folder. However, I don't know how
to fix it.
This PR does a little bit of a touch-up on the copywriting on the
assistant config UI. I had friends reporting to me that some of the
writing could be clearer, and hopefully, this goes into that direction!
Release Notes:
- N/A
This PR improves adding and working with icons by using the new
`DerivePathStr` to derive icon paths.
This means paths no longer need to be manually specified, and the
`IconName` and file name will always be consistent between icons.
This PR does not do any work to standardize icons visually, remove
unused icons, or any other such cleanup.
Release Notes:
- N/A
This PR pulls non-icon assets out of `ui::components::icon` in
preparation for icon standardization.
In the future icons will have standard names and sizes, and these image
assets won't conform to those constraints.
We can also add a `ui::components::image::Image` wrapper around the
`gpui::img` element in the future for any Zed-specific image styling we
want to enforce.
Of note:
```rust
#[derive(Debug, PartialEq, Eq, Copy, Clone, EnumIter, EnumString, IntoStaticStr, Serialize, Deserialize, DerivePathStr)]
#[strum(serialize_all = "snake_case")]
#[path_str(prefix = "images", suffix = ".svg")]
pub enum VectorName {
ZedLogo,
ZedXCopilot,
}
```
You can see in the above code we no longer need to manually specify
paths for image/icon enums like we currently do in
`ui::components::icon`.
The icon component will get this same treatment in the future, once we:
- do the design work needed to standardize the icons
- remove unused icons
- update icon names
Release Notes:
- N/A
This is a barebones modification of the OpenAI provider code to
accommodate non-streaming completions. This is specifically for the o1
models, which do not support streaming. Tested that this is working by
running a `/workflow` with the following (arbitrarily chosen) settings:
```json
{
"language_models": {
"openai": {
"version": "1",
"available_models": [
{
"name": "o1-preview",
"display_name": "o1-preview",
"max_tokens": 128000,
"max_completion_tokens": 30000
},
{
"name": "o1-mini",
"display_name": "o1-mini",
"max_tokens": 128000,
"max_completion_tokens": 20000
}
]
}
},
}
```
Release Notes:
- Changed `low_speed_timeout_in_seconds` option to `600` for OpenAI
provider to accommodate recent o1 model release.
---------
Co-authored-by: Peter <peter@zed.dev>
Co-authored-by: Bennet <bennet@zed.dev>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Axel Carlsson