This PR replaces the `lazy_static!` usages in the `paths` crate with
`OnceLock` from the standard library.
This allows us to drop the `lazy_static` dependency from this crate.
The paths are now exposed as accessor functions that reference a private
static value.
Release Notes:
- N/A
Previously we were using a single globset::Glob in PathMatcher; higher
up the stack, we were then resorting to using a list of PathMatchers.
globset crate exposes a GlobSet type that's better suited for this use
case. In my benchmarks, using a single PathMatcher with GlobSet instead
of a Vec of PathMatchers with Globs is about 3 times faster with the
default 'file_scan_exclusions' values. This slightly improves our
project load time for projects with large # of files, as showcased in
the following videos of loading a project with 100k source files. This
project is *not* a git repository, so it should measure raw overhead on
our side.
Current nightly: a6b9ff8415https://github.com/zed-industries/zed/assets/24362066/e0aa9f8c-aae6-4348-8d42-d20bd41fcd76
versus this PR:
https://github.com/zed-industries/zed/assets/24362066/408dcab1-cee2-4c9e-a541-a31d14772dd7
Release Notes:
- Improved performance in large worktrees
Release Notes:
- Added a more detailed message in place of the generic `checking...`
messages when Rust-analyzer is running.
- Added a rate limit for language server status messages, to reduce
noisiness of those updates.
- Added a `cancel language server work` action which will cancel
long-running language server tasks.
---------
Co-authored-by: Richard <richard@zed.dev>
This PR extracts the definition of the various Zed paths out of `util`
and into a new `paths` crate.
`util` is for generic utils, while these paths are Zed-specific. For
instance, `gpui` depends on `util`, and it shouldn't have knowledge of
these paths, since they are only used by Zed.
Release Notes:
- N/A
I previously put this logic directly into `project.rs`, but it doesn't
feel good to pollute that code with telemetry logic, so I've moved it
over to `telemetry.rs`.
Release Notes:
- N/A
This fixes `project_tests::rescan_and_remote_updates` .
That test was actually correctly failing, revealing two bugs on Linux.
Release Notes:
- Fixed an issue where file renames were not detected on Linux.
- Fixed performance problems caused by excessive file system events on
Linux.
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
This PR disables the
`project::project_tests::test_rescan_and_remote_updates` test on Linux,
as we've been seeing it fail quite consistently in CI.
We can re-enable it once we've had a chance to investigate and fix.
Release Notes:
- N/A
Fixes#12920
VTSLS does not mark snippet completions as such in the initial
completion response - not until we resolve them; however, we do not
touch initial contents of completion during resolution, which led to us
not treating a snippet as such.
Release Notes:
- Fixed snippet completions sometimes being treated as plain text
completions when using VTSLS
Note:
- We have disabled all tests that rely on Postgres in the Linux CI. We
only really need to test these once, and as macOS is our team's primary
platform, we'll only enable them on macOS for local reproduction.
- We have disabled all tests that rely on the font metrics. We
standardized on Zed Mono in many fonts, but our CoreText Text System and
Cosmic Text System proved to be very different in effect. We should
revisit if we decide to standardize our text system across platforms
(e.g. using Harfbuzz everywhere)
- Extended the condition timeout significantly. Our CI machines are slow
enough that this is causing spurious errors in random tests.
Release Notes:
- N/A
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
TODO:
- [x] Finish GPUI changes on other operating systems
This is a largely internal change to how we report data to our
diagnostics and telemetry. This PR also includes an update to our blade
backend which allows us to report errors in a more useful way when
failing to initialize blade.
Release Notes:
- N/A
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This PR adds support for [linked editing of
ranges](https://microsoft.github.io/language-server-protocol/specifications/lsp/3.17/specification/#textDocument_linkedEditingRange),
which in short means that editing one part of a file can now change
related parts in that same file. Think of automatically renaming
HTML/TSX closing tags when the opening one is changed.
TODO:
- [x] proto changes
- [x] Allow disabling linked editing ranges on a per language basis.
Fixes#4535
Release Notes:
- Added support for linked editing ranges LSP request. Editing opening
tags in HTML/TSX files (with vtsls) performs the same edit on the
closing tag as well (and vice versa). It can be turned off on a language-by-language basis with the following setting:
```
"languages": {
"HTML": {
"linked_edits": true
},
}
```
---------
Co-authored-by: Bennet <bennet@zed.dev>
This PR is an internal refactor in preparation for remote editing. It
restructures the public interface of `Worktree`, reducing the number of
call sites that assume that a worktree is local or remote.
* The Project no longer calls `worktree.as_local_mut().unwrap()` in code
paths related to basic file operations
* Fewer code paths in the app rely on the worktree's `LocalSnapshot`
* Worktree-related RPC message handling is more fully encapsulated by
the `Worktree` type.
to do:
* [x] file manipulation operations
* [x] sending worktree updates when sharing
for later
* opening buffers
* updating open buffers upon worktree changes
Release Notes:
- N/A
Release Notes:
- Added support for looking up the `rust-analyzer` binary in `$PATH`. This allows using such tools as `asdf` and nix to configure per-folder rust installations. To enable this behavior, use the `path_lookup` key when configuring the `rust-analyzer` `binary`: `{"lsp": {"rust-analyzer": {"binary": {"path_lookup": true }}}}`.
The `worktree` crate mainly provides an in-memory model of a directory
and its git repositories. But because it was originally extracted from
the Project crate, it also contained lingering bits of code that were
outside of that area:
* it had a little bit of logic related to buffers (though most buffer
management lives in `project`)
* it had a *little* bit of logic for storing diagnostics (though the
vast majority of LSP and diagnostic logic lives in `project`)
* it had a little bit of logic for sending RPC message (though the
*receiving* logic for those RPC messages lived in `project`)
In this PR, I've moved those concerns entirely to the project crate
(where they were already dealt with for the most part), so that the
worktree crate can be more focused on its main job, and have fewer
dependencies.
Worktree no longer depends on `client` or `lsp`. It still depends on
`language`, but only because of `impl language::File for
worktree::File`.
Release Notes:
- N/A
Fixes https://github.com/zed-industries/zed/issues/10890
* removes `unwrap()` that caused panics for text elements with no text,
remaining after edit state is cleared but project entries are not
updated, having the fake, "new entry"
* improves discoverability of the FS errors during file/directory
creation: now those are shown as workspace notifications
* stops printing anyhow backtraces in workspace notifications, printing
the more readable chain of contexts instead
* better indicates when new entries are created as excluded ones
Release Notes:
- Improve excluded entry creation workflow in the project panel
([10890](https://github.com/zed-industries/zed/issues/10890))
Previously, each git `Repository` object was held inside of a mutex.
This was needed because libgit2's Repository object is (as one would
expect) not thread safe. But now, the two longest-running git operations
that Zed performs, (`status` and `blame`) do not use libgit2 - they
invoke the `git` executable. For these operations, it's not necessary to
hold a lock on the repository.
In this PR, I've moved our mutex usage so that it only wraps the libgit2
calls, not our `git` subprocess spawns. The main user-facing impact of
this is that the UI is much more responsive when initially opening a
project with a very large git repository (e.g. `chromium`, `webkit`,
`linux`).
Release Notes:
- Improved Zed's responsiveness when initially opening a project
containing a very large git repository.
- Confirming a completion now runs the command immediately
- Hitting `enter` on a line with a command now runs it
- The output of commands gets folded away and replaced with a custom
placeholder
- Eliminated ambient context
<img width="1588" alt="image"
src="https://github.com/zed-industries/zed/assets/482957/b1927a45-52d6-4634-acc9-2ee539c1d89a">
Release Notes:
- N/A
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Fixes https://github.com/zed-industries/zed/issues/9575
Fixes https://github.com/zed-industries/zed/issues/4294
### Problem
When a large git repository's `.git` folder changes (due to a `git
commit`, `git reset` etc), Zed needs to recompute the git status for
every file in that git repository. Part of computing the git status is
the *unstaged* part - the comparison between the content of the file and
the version in the git index. In a large git repository like `chromium`
or `linux`, this is inherently pretty slow.
Previously, we performed this git status all at once, and held a lock on
our `BackgroundScanner`'s state for the entire time. On my laptop, in
the `linux` repo, this would often take around 13 seconds.
When opening a file, Zed always refreshes the metadata for that file in
its in-memory snapshot of worktree. This is normally very fast, but if
another task is holding a lock on the `BackgroundScanner`, it blocks.
### Solution
I've restructured how Zed handles Git statuses, so that when a git
repository is updated, we recompute files' git statuses in fixed-sized
batches. In between these batches, the `BackgroundScanner` is free to
perform other work, so that file operations coming from the main thread
will still be responsive.
Release Notes:
- Fixed a bug that caused long delays in opening files right after
performing a commit in very large git repositories.
This PR adds initial support for defining slash commands for the
Assistant from extensions.
Slash commands are defined in an extension's `extension.toml`:
```toml
[slash_commands.gleam-project]
description = "Returns information about the current Gleam project."
requires_argument = false
```
and then executed via the `run_slash_command` method on the `Extension`
trait:
```rs
impl Extension for GleamExtension {
// ...
fn run_slash_command(
&self,
command: SlashCommand,
_argument: Option<String>,
worktree: &zed::Worktree,
) -> Result<Option<String>, String> {
match command.name.as_str() {
"gleam-project" => Ok(Some("Yayyy".to_string())),
command => Err(format!("unknown slash command: \"{command}\"")),
}
}
}
```
Release Notes:
- N/A
Release Notes:
- Added ZED_RELATIVE_FILE (path to current file relative to worktree
root) and ZED_DIRNAME (path to the directory containing current file)
task variables.
This PR changes the interface of ContextProvider, allowing it to inspect
*all* variables set so far during the process of building
`TaskVariables`. This makes it possible to capture e.g. an identifier in
tree-sitter query, process it and then export it as a task variable.
Notably, the list of variables includes captures prefixed with leading
underscore; they are removed after all calls to `build_context`, but it
makes it possible to capture something and then conditionally preserve
it (and perhaps modify it).
Release Notes:
- N/A
This fixes#4529 by allowing unsaved buffers to be formatted with
prettier.
Steps to do that:
1. Create a new buffer
2. Set language for the buffer (e.g.: `language selector: toggle` and
JSON)
3. In settings, set prettier parser for language (can't be inferred,
since we don't have filename) and allow formatting with prettier:
```json
{
"languages": {
"JSON": {
"prettier": {
"allowed": true,
"parser": "json"
}
}
}
}
```
4. Use `editor: format`
Release Notes:
- Added ability to format unsaved buffers with Prettier. Requirement is
to set a Prettier parser in the user settings. Example for JSON: `{
"languages": { "JSON": { "prettier": { "allowed": true, "parser": "json"
} } } }` ([#4529](https://github.com/zed-industries/zed/issues/4529)).
Demo:
https://github.com/zed-industries/zed/assets/1185253/d24e490b-2e2c-4a5d-95a8-fc8675523780
This fixes#10224 by handling `client/unregisterCapability` requests
that have a `workspace/didChangeWatchedFiles` method.
While debugging the issue, I found out that `gopls` seems to block
indefinitely when there's no reply to the `client/unregisterCapability`
request. Even an empty response would fix the issue.
Seems like gopls 15.x and later seem to handle nested subfolders well,
but do not handle unanswered requests.
Instead of replying with an empty response, I decided to change how we
handle file watching and keep a list of all registered paths so that we
can then unregister paths and recreate the glob patterns.
Release Notes:
- Fixed `gopls` not working correctly when the `go.mod` file was in a
subfolder and not the root folder of the project opened in Zed.
([#10224](https://github.com/zed-industries/zed/issues/10224)).
Fixes#5267
TODO:
- [x] Publish our fork of vscode-langservers-extracted on GH and wire
that through as a language server of choice for HTML extension.
- [x] Figure out how to prevent edits made by remote participants from
moving the cursor of a host.
Release Notes:
- Added support for autoclosing of HTML tags in local projects.
Max Brunsfeld