Closes#48683
Per the devcontainer spec, `.devcontainer.json` in the project root is
a valid config location. It is only used when no configurations are
found inside `.devcontainer/`.
Extract `find_configs_in_snapshot` for testability and add tests.
Release Notes:
- Added support for `.devcontainer.json` in project root
It's happeningggggg
Release Notes:
- Changed the Agent Panel so that the Active Thread is restored on
restart.
---------
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Co-authored-by: Anthony Eid <anthony@zed.dev>
Co-authored-by: Danilo Leal <67129314+danilo-leal@users.noreply.github.com>
Co-authored-by: Richard Feldman <richard@zed.dev>
Co-authored-by: Zed Zippy <234243425+zed-zippy[bot]@users.noreply.github.com>
Small fix for a bug introduced in #47411
In-progress dev container creation didn't show up in modal because of a
duplicated code path. This unifies the logic and ensures that "creating
dev container" shows up while creation in progress.
Release Notes:
- Fixed modal for creating dev container
Closes#46252
Uses the `remoteUser` property returned from the devcontainer CLI so
that settings are respected. Additionally, checks for a default shell in
`passwd` if `$SHELL` is not set.
Release Notes:
- Fixed remote_user and shell inconsistencies from within dev containers
- **title_bar: Extract platform_title_bar from title_bar**
- **file_finder no longer depends on search and agent_servers no longer
depend on language_models**
Release Notes:
- N/A
---------
Co-authored-by: Zed Zippy <234243425+zed-zippy[bot]@users.noreply.github.com>
Closes#47309
Rewroked the file parsing loop so that if one file is missing it doesn't
cause the loop to exit prematurely.
Release Notes:
* Fixed issue where user .ssh/config file would not parse if global ssh
config file was not present.
---------
Co-authored-by: Gaff <226665+Gaff@users.noreply.github.com>
Follow-Up-For: #47243
Previously, we would detach tasks spawned to watch config files.
However, the task blocked on receiving a file event before checking if
the receiver for the updates channel was dropped, causing the task to
never exit. The fix here was to return the task explicitly, so that it
can be dropped instead of calling `.detach()` on it. There is definitely
a way to `select!` between the receiver being dropped and the next file
system event, but I couldn't figure it out in a reasonable amount of
time and decided it wasn't worth it.
Release Notes:
- Fixed an issue where a few file descriptors would be leaked each time
a project was closed
Adds the ability to create a dev container definition from scratch.
Additionally, separates devcontainer logic out into its own crate, since
it was getting sufficiently complex to separate from the
`recent_projects` crate.
A screen recording of the modal experience:
https://github.com/user-attachments/assets/f6cf95e1-eb7b-4ca3-86c7-c1cbc26ca557
Release Notes:
- Added modal to initialize a dev container definition in the project
with `projects: initialize dev container`
- Added podman support for dev container actions with the `use_podman`
setting
- Improved devcontainer error handling
---------
Co-authored-by: Sam Coward <idoru42@gmail.com>
Closes #ISSUE
Moves the settings content definitions into their own crate, so that
they are compiled+cached separately from settings, primarily to avoid
recompiles due to changes in gpui. In that vain many gpui types such as
font weight/features, and `SharedString` were replaced in the content
crate, either with `*Content` types for font/modifier things, or
`String`/`Arc<str>` for `SharedString`. To make the conversions easy a
new trait method in the settings crate named `IntoGpui::into_gpui`
allows for `into()` like conversions to the gpui types in
`from_settings` impls.
Release Notes:
- N/A
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
This PR adds a list of recent projects to the multi-project dropdown,
avoiding the need to open up the picker and the mouse travel when using
a pointer to interact with it. When the recent projects list is bigger
than 5, we display more in a "View More" submenu.
<img width="500" height="800" alt="Screenshot 2026-01-14 at 5 15@2x"
src="https://github.com/user-attachments/assets/31f11e3e-d010-4b66-a539-f74cbc572e40"
/>
Release Notes:
- Workspace: Added the list of recent projects to the multi-project
title bar menu.
Closes #ISSUE
Problem:
- The status bar’s pending keystroke indicator (shown next to --NORMAL--
in Vim mode) didn’t clear when focus moved to another context, e.g.
hitting g in the editor then clicking the Git panel. The keymap state
correctly canceled the prefix, but observers that render the indicator
never received a “pending input changed” notification, so the UI kept
showing stale prefixes until a new keystroke occurred.
Fix:
- The change introduces a `pending_input_changed_queued` flag and a new
helper `notify_pending_input_if_needed` which will flushes the queued
notification as soon as we have an App context. The
`pending_input_changed` now resets the flag after notifying subscribers.
Before:
https://github.com/user-attachments/assets/7bec4c34-acbf-42bd-b0d1-88df5ff099aa
After:
https://github.com/user-attachments/assets/2264dc93-3405-4d63-ad8f-50ada6733ae7
Release Notes:
- Fixed: pending keybinding prefixes on the status bar now clear
immediately when focus moves to another panel or UI context.
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Obviously this doesn't do too much without having an actual windows
server binary for the remote side, but it does at least improve the
error message as right now we will complain about `uname` not being a
valid powershell command.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Closes https://github.com/zed-industries/zed/issues/12589
Forces Zed to require user permissions before running any basic
potentially dangerous actions: parsing and synchronizing
`.zed/settings.json`, downloading and spawning any language and MCP
servers (includes `prettier` and `copilot` instances) and all
`NodeRuntime` interactions.
There are more we can add later, among the ideas: DAP downloads on
debugger start, Python virtual environment, etc.
By default, Zed starts in restricted mode and shows a `! Restricted
Mode` in the title bar, no aforementioned actions are executed.
Clicking it or calling `workspace::ToggleWorktreeSecurity` command will
bring a modal to trust worktrees or dismiss the modal:
<img width="1341" height="475" alt="1"
src="https://github.com/user-attachments/assets/4fabe63a-6494-42c7-b0ea-606abb1c0c20"
/>
Agent Panel shows a message too:
<img width="644" height="106" alt="2"
src="https://github.com/user-attachments/assets/0a4554bc-1f1e-455b-b97d-244d7d6a3259"
/>
This works on local, SSH and WSL remote projects, trusted worktrees are
persisted between Zed restarts.
There's a way to clear all persisted trust with
`workspace::ClearTrustedWorktrees`, this will restart Zed.
This mechanism can be turned off with settings:
```jsonc
"session": {
"trust_all_worktrees": true
}
```
in this mode, all worktrees will be trusted by default, allowing all
actions, but no auto trust will be persisted: hence, when the setting is
changed back, auto trusted worktrees will require another trust
confirmation.
This settings switch was added to the onboarding view also.
Release Notes:
- Introduced worktree trust mechanism, can be turned off with
`"session": { "trust_all_worktrees": true }`
---------
Co-authored-by: Matt Miller <mattrx@gmail.com>
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Co-authored-by: John D. Swanson <swanson.john.d@gmail.com>
Partially addresses #11473
MVP of dev containers with the following capabilities:
- If in a project with `.devcontainer/devcontainer.json`, a pop-up
notification will ask if you want to open the project in a dev
container. This can be dismissed:
<img width="1478" height="1191" alt="Screenshot 2025-12-08 at 3 15
23 PM"
src="https://github.com/user-attachments/assets/ec2e20d6-28ec-4495-8f23-4c1d48a9ce78"
/>
- Similarly, if a `devcontainer.json` file is in the project, you can
open a devcontainer (or go the devcontainer.json file for further
editing) via the `open remote` modal:
https://github.com/user-attachments/assets/61f2fdaa-2808-4efc-994c-7b444a92c0b1
*Limitations*
This is a first release, and comes with some limitations:
- Zed extensions are not managed in `devcontainer.json` yet. They will
need to be installed either on host or in the container. Host +
Container sync their extensions, so there is not currently a concept of
what is installed in the container vs what is installed on host: they
come from the same list of manifests
- This implementation uses the [devcontainer
CLI](https://github.com/devcontainers/cli) for its control plane. Hence,
it does not yet support the `forwardPorts` directive. A single port can
be opened with `appPort`. See reference in docs
[here](https://github.com/devcontainers/cli/tree/main/example-usage#how-the-tool-examples-work)
- Editing devcontainer.json does not automatically cause the dev
container to be rebuilt. So if you add features, change images, etc, you
will need to `docker kill` the existing dev container before proceeding.
- Currently takes a hard dependency on `docker` being available in the
user's `PATH`.
Release Notes:
- Added ability to Open a project in a DevContainer, provided a
`.devcontainer/devcontainer.json` is present
---------
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Co-authored-by: Danilo Leal <67129314+danilo-leal@users.noreply.github.com>
**Problem addressed:**
Cannot distinguish an identical path on multiple remote hosts in the
"Recent Projects" picker.
**Related work:**
- Issue #40358 (already closed) identified the issue in the "Expected
Behavior" section for both WSL and SSH remotes.
- PR #40375 implemented WSL distro labels.
**Screenshots:**
Before:
<img width="485" height="98" alt="screenshot-sample-project-before"
src="https://github.com/user-attachments/assets/182d907a-6f11-44aa-8ca5-8114f5551c93"
/>
After:
<img width="481" height="94" alt="screenshot-sample-project-after"
src="https://github.com/user-attachments/assets/5f87ff12-6577-404e-9319-717f84b7d2e7"
/>
**Implementation notes:**
RemoteConnectionOptions::display_name() will be subject to
exhaustiveness checking on RemoteConnectionOption variants.
Keeps the same UI approach as the WSL distro variants.
Release Notes:
- Improved Recent Projects picker: now displays SSH hostname with
remotes.
We've had several outages with a proximate cause of "vercel is
complicated",
and auto-update is considered a critical feature; so lets not use vercel
for
that.
Release Notes:
- Auto Updates (and remote server binaries) are now downloaded via
https://cloud.zed.dev instead of https://zed.dev. As before, these URLs
redirect to the GitHub release for actual downloads.
Related discussions #26084
Worktree creations are implemented similar to how branch creations are
handled on the branch picker (the user types a new name that's not on
the list and a new entry option appears to create a new branch with that
name).
https://github.com/user-attachments/assets/39e58983-740c-4a91-be88-57ef95aed85b
With this picker you have a few workflows:
- Open the picker and type the name of a branch that's checked out on an
existing worktree:
- Press enter to open the worktree on a new window
- Press ctrl-enter to open the worktree and replace the current window
- Open the picker and type the name of a new branch or an existing one
that's not checked out in another worktree:
- Press enter to create the worktree and open in a new window. If the
branch doesn't exists, we will create a new one based on the branch you
have currently checked out. If the branch does exists then we create a
worktree with that branch checked out.
- Press ctrl-enter to do everything on the previous point but instead,
replace the current window with the new worktre.
- Open the picker and type the name of a new branch or an existing one
that's not checked out in another worktree:
- If a default branch is detected on the repo, you can create a new
worktree based on that branch by pressing ctrl-enter or
ctrl-shift-enter. The first one will open a new window and the last one
will replace the current one.
Note: If you preffer to not use the system prompt for choosing a
directory, you can set `"use_system_path_prompts": false` in zed
settings.
Release Notes:
- Added git worktree picker to open a git worktree on a new window or
replace the current one
- Added git worktree creation action
---------
Co-authored-by: Cole Miller <cole@zed.dev>
Closes#39172
This refactors when we resolve UI keybindings in an effort to reduce
flickering whilst painting these: Previously, we would always resolve
these upon creating the binding. This could lead to cases where the
corresponding context was not yet available and no binding could be
resolved, even if the binding was then available on the next presented
frame. Following that, on the next rerender of whatever requested this
keybinding, the keybind for that context would then be found, we would
render that and then also win a layout shift in that process, as we went
from nothing rendered to something rendered between these frames.
With these changes, this now happens less often, because we only look
for the keybinding once the context can actually be resolved in the
window.
| Before | After |
| --- | --- |
|
https://github.com/user-attachments/assets/adebf8ac-217d-4c7f-ae5a-bab3aa0b0ee8
|
https://github.com/user-attachments/assets/70a82b4b-488f-4a9f-94d7-b6d0a49aada9
|
Also reduced cloning in the keymap editor in this process, since that
requiered changing due to this anyway.
Release Notes:
- Fixed some cases where keybinds would appear with a slight delay,
causing a flicker in the process
John Tur