Self-Review Checklist:
- [x] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [x] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable
Closes #ISSUE
Release Notes:
- N/A or Added/Fixed/Improved ...
Finally continuing from PR #35200:
I adapted the fix to the changed find_target() logic and added more
tests for version strings like `0.82.46`.
This is a different but similar fix compared to #47356 for helix mode -
not sure if this can and should be unified?
Self-Review Checklist:
- [x] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
(should not affect UI at all)
- [x] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable
Closes#35193
Release Notes:
- Fixed vim's increment (`ctrl-a`) and decrement (`ctrl-x`) commands
skipping the number under the cursor in dotted strings like version
numbers (e.g. `0.81.46`) and hyphened date strings (e.g. `2015-02-01`)
---------
Co-authored-by: Stefan Bethge <kjyv@users.noreply.github.com>
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: dino <dinojoaocosta@gmail.com>
Closes#47251
Fix dot (`.`) repeat not correctly repeating the last change after
replaying a macro (`@register`)
([#47251](https://github.com/zed-industries/zed/issues/47251))
When replaying a macro that contains text insertions,
`replay_insert_event` calls `handle_input` directly and never emits
`InputHandled`, so the `observe_insertion` subscription never fires.
This left the dot register stale — `.` after `@register` would repeat an
earlier change instead of the last one made by the macro.
Fix by calling `observe_insertion` explicitly in the
`ReplayableAction::Insertion` branch of `Replayer::next`.
Release Notes:
- Fixed dot (`.`) repeat not repeating the last change made by a macro
(`@register`).
---------
Co-authored-by: Smit Barmase <heysmitbarmase@gmail.com>
The cmd_f_search flag introduced in #51073 was never cleared when
switching to vim-style search commands, causing collapse_matches to
remain false and match ranges to appear as visual selections.
Reset cmd_f_search when n/N or */# are used, restore Normal mode if
Visual was entered due to the non-collapsed selection, and fix an early
return in visual select_match that leaked collapse_matches.
Fixes#53896
Self-Review Checklist:
- [ ] I've reviewed my own diff for quality, security, and reliability
- [ ] Unsafe blocks (if any) have justifying comments
- [ ] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [ ] Tests cover the new/changed behavior
- [ ] Performance impact has been considered and is acceptable
Closes #ISSUE
Release Notes:
- N/A or Added/Fixed/Improved ...
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Closes#55619
### Summary
- Route `buffer_search::UseSelectionForFind` through
`BufferSearchBar::deploy` instead of updating the query editor directly.
- Add an explicit seed-query override to `deploy`, so the Cmd-E action
can force `SeedQuerySetting::Always` while regular deploy callers
continue to pass `None` and respect the user’s
`seed_search_query_from_cursor` setting.
- By going through `deploy`, Cmd-E now also runs the search path that
keeps buffer-search navigation state in sync:
- shows/initializes the search bar for the active searchable item
- applies the seeded query via `search_suggested`
- calls `search`, which updates the query editor, search options, active
search query, search history, and macOS find pasteboard
- refreshes `searchable_items_with_matches` and `active_match_index`
- activates the current match after the search completes
- This ensures the subsequent Cmd-G action has the expected active
query, match list, search token, and active match index to select the
next result.
- Add a macOS-only end-to-end regression test using the default macOS
keymap with `simulate_keystrokes("cmd-e")` and
`simulate_keystrokes("cmd-g")`.
### Validation
- `cargo test -p search test_cmd_e_then_cmd_g_uses_selection_for_find`
- `cargo fmt --check --package search --package zed_actions`
- `./script/check-keymaps`
- `cargo check -p search`
- `cargo check -p workspace`
- `cargo check -p vim`
Release Notes:
- Fixed macOS Cmd-E/Cmd-G find behavior so Cmd-E seeds find from the
cursor or selection and Cmd-G advances through the newly seeded matches.
Self-Review Checklist:
- [x] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [x] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable
Closes ##42292
The text inserted in the search ('\$SEARCH') and replace ('$$OTHER')
inputs of the top-panel is a little anti-aesthetic, but that seems out
of scope for this issue.
Release Notes:
- '$' in the second clause of vim-style '%s/find/replace/g' actions is
correctly escaped.
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Self-Review Checklist:
- [x] I've reviewed my own diff for quality, security, and reliability
- [ ] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the UI/UX checklist
- [x] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable
Closes#52352
Release Notes:
- Fixed system clipboard being overwritten when pasting over a visual
selection with Cmd-V/Ctrl-V in vim mode
Closes#4751
## Testing
- Manually tested by comparing the behaviors with vscode.
- Those requirements are added to unit tests.
Release Notes:
- Added action to toggle block comments
---------
Co-authored-by: ozacod <ozacod@users.noreply.github.com>
Closes#48007
Release Notes:
- Added editor setting for changing regex mode default in vim searches
Summary:
- Based on the report in #48007 and the discussion here
https://github.com/zed-industries/zed/pull/48127#issuecomment-3838678903
- There was feedback mentioning that vim-mode needs to default
vim-searches to use regex-mode (even when the editor regex-search
setting is disabled). However, it was suggested that a vim search
setting could be configured to adjust this behaviour.
- In this PR a new vim setting was added to change whether vim-searches
will use regex-mode by default, so now users can can configure
vim-search to not use regex-mode when typing the `/` character (or using
the vim search command).
Screen Captures:
https://github.com/user-attachments/assets/172669fb-ab78-41a1-9485-c973825543c5
When vim mode is enabled, previously if Cmd-F (or platform equivalent)
was pressed, enter will go to the editor's first match, and then hitting
enter again goes to the next line rather than next match. This PR
changes it to make enter go to the next match, which matches the
convention in most other programs. The behavior when search is initiated
with / is left unchanged.
This is a reopen of #35157, rebased and fixed.
Closes#7692
Release Notes:
- In vim mode, when search is triggered by the non-vim mode shortcut
(cmd-f by default) enter will now behave as it does outside of vim mode.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Ensure that the `vim::visual::Vim::visual_block_motion` method is called
when `scroll_editor` is called while in Visual Block mode. This fixes an
issue where, after getting into `Visual Block` mode, if the user used
`ctrl-d` or `ctrl-u` to scroll half of the page, the wrong selection
would be made and, if `shift-i` was used to start inserting at the start
of the line, a single cursor would be placed at the cursor position
where the selection was started, instead of one cursor per each of the
selected lines.
These changes ensure that we now match Neovim's behavior for the same
flow.
---------
Signed-off-by: Xiaobo Liu <cppcoffee@gmail.com>
Co-authored-by: dino <dinojoaocosta@gmail.com>
When a command used an explicit register (e.g. `"_dd` or `"add`), the
subsequent dot repeat (`.`) was ignoring that register and using the
default instead.
Store the register at recording start in `recording_register_for_dot`,
persist it to `recorded_register_for_dot` when recording stops, and
restore it in `Vim::repeat` when no explicit register is supplied for
`.`. An explicit register on `.` (e.g. `"b.`) still takes precedence.
This commit also updates the dot-repeat logic to closely follow Neovim's
when using numbered registers, where each dot repeat increments the
register. For example, after using `"1p`, using `.` will repeat the
command using `"2p`, `"3p`, etc.
Closes#49867
Release Notes:
- Fixed vim's repeat . to preserve the register the recorded command
used
- Updated vim's repeat . to increment the recorded register when using
numbered registers
---------
Co-authored-by: dino <dinojoaocosta@gmail.com>
* Add a dedicated `vim.yank.background` theme color for the yank
highlight, which was previously hardcoded to
`editor.document_highlight.read_background`.
* When a theme doesn't define `vim.yank.background`, it falls back to
`editor.document_highlight.read_background` for backwards
compatibility.
* The VS Code theme importer maps `editor.rangeHighlightBackground` to
this new color.
Release Notes:
- Added configurable `vim.yank.background` theme color for vim yank
background highlight
---------
Co-authored-by: dino <dinojoaocosta@gmail.com>
Ensure that editing one tag in a linked pair correctly mirrors the change
to the other tag for Vim delete/change/substitute commands, visual
mode operations, and the standard editor delete action.
Extract a `LinkedEdits` struct to deduplicate linked edit collection and
application across `handle_input`, `replace_selections`, `do_completion`,
`backspace`, and `delete`. Introduce `linked_edits_for_selections` as a
shared helper for building linked edits from the current selections.
Closes#35941
Release Notes:
- Fixed linked edits for delete/change/substitute commands so tag pairs
stay in sync.
---------
Co-authored-by: dino <dinojoaocosta@gmail.com>
When clipboard data was produced by the editor's copy/cut with multiple
entire-line selections, vim's paste would panic with `byte index N is
out of bounds`.
The editor's `do_copy` and `cut_common` skip the `\n` separator between
clipboard selections when the previous selection was an entire-line
selection (because the text already ends with `\n`). However, vim's
paste code unconditionally did `start_offset = end_offset + 1`, always
assuming a `\n` separator exists between every pair of selections. This
caused the accumulated offset to exceed the text length, resulting in a
string slicing panic.
The fix checks `clipboard_selection.is_entire_line` to decide whether to
skip the separator, matching the behavior of the editor's own `do_paste`
method. The same fix is applied to both the vim and helix paste
implementations.
Release Notes:
- Fixed a crash when using vim paste on clipboard data copied with the
editor's copy command containing multiple entire-line selections.
Replaces a bunch of `impl FnMut` parameters with `&mut dyn FnMut` for
functions where this is the sole generic parameter.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
The multi workspace refactor **completely** broke the Vim mode, saving
is not possible, and various other actions. This PR fixes this
- [X] Code Reviewed
- [X] Manual QA
Release Notes:
- N/A
`find_target()` failed to match numbers followed by a dot and a
non-digit (e.g. `1. item`), because the dot unconditionally reset
the scan state, discarding the number. Additionally, numbers at the
start of non-first lines were missed because the backward scan
stopped on the preceding newline and the forward scan immediately
broke on it.
Closes#47761
Release Notes:
- Fixed vim increment (`ctrl-a`) and decrement (`ctrl-x`) not working on Markdown ordered list markers like `1.`, `2.`, etc.
---------
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
Co-authored-by: dino <dinojoaocosta@gmail.com>
Part of #7450
Big thanks to @macmv for pushing this forwards so much!
Rebased version of https://github.com/zed-industries/zed/pull/39539 as
working on an in-org branch simplifies a lot of things for us)
Release Notes:
- Added LSP semantic tokens highlighting support
---------
Co-authored-by: Neil Macneale V <neil.macneale.v@gmail.com>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Co-authored-by: Zed Zippy <234243425+zed-zippy[bot]@users.noreply.github.com>
- Remove old attempt to sync scrolling
- Share a `ScrollAnchor` between the two sides, and be sure to resolve
it against the correct snapshot
- Allow either side to initiate an autoscroll request, and make sure
that request is processed in the same frame by the other side
Release Notes:
- N/A
---------
Co-authored-by: cameron <cameron.studdstreet@gmail.com>
Co-authored-by: Zed Zippy <234243425+zed-zippy[bot]@users.noreply.github.com>
Co-authored-by: Jakub <jakub@zed.dev>
Fixes#8048
## Summary
In vim mode, pressing Escape to dismiss the buffer search now correctly
restores the cursor to its original position, rather than leaving it at
the first match.
## Problem
When using vim's `/` command to search:
1. User positions cursor at line X
2. User presses `/` to open search, types a query
3. Matches are highlighted, cursor may visually jump to first match
4. User presses Escape to dismiss without navigating
5. **Bug:** Cursor ends up at first match instead of line X
This breaks vim parity where Escape should cancel the search and restore
cursor position.
## Solution
The fix leverages the `focused()` callback in `vim.rs`, which is called
when the editor regains focus after the search bar is dismissed.
**Key insight:** When search starts via `/`, the cursor position is
saved in `SearchState.prior_selections`. When search is *submitted* with
Enter, `search_submit()` drains these selections. But when search is
*dismissed* with Escape, they remain.
So in `focused()`, if:
- `prior_selections` is non-empty, AND
- The search bar's `is_dismissed()` returns true
...then we know the user dismissed the search (Escape) rather than
submitted it (Enter), and we restore the cursor.
## Why not handle `buffer_search::Dismiss` directly?
The initial approach tried to register a vim handler for the `Dismiss`
action. This didn't work because when Escape is pressed, the search bar
(which has focus) handles the `Cancel` action internally and calls its
`dismiss()` method directly—it doesn't dispatch `Dismiss` through the
action system. The vim handler registered on the editor was never
invoked.
## Test Plan
- Added `test_search_dismiss_restores_cursor` — verifies cursor
restoration when search is dismissed
- Added `test_search_dismiss_restores_cursor_no_matches` — verifies
behavior when query has no matches
- All 455 vim tests pass
- Manual testing confirms fix works with both `/` and `cmd-f`
## Release Notes
- Fixed vim mode: cursor now returns to original position when
dismissing buffer search with Escape (#8048)
---------
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
Add support for Vim's `gdefault` option which makes the `:substitute`
command replace all matches in a line by default, instead of just the
first match. When enabled, the `/g` flag inverts this behavior.
- Add `vim.gdefault` setting
- Add `:set gdefault`, `:set nogdefault` (and short forms `:set gd`, `:set nogd`)
- Fix handling of multiple `/g` flags so that each one inverts the one before
Closes#36209
Release Notes:
- vim: Add `vim.gdefault` setting to make `/g` (replace all matches in a line) the default for substitutions, along with `:set gdefault` and `:set nogdefault` commands (short forms: `gd`, `nogd`)
---------
Co-authored-by: dino <dinojoaocosta@gmail.com>
Fixes the `vim::ScrollUp/Down` commands when a normal-mode vim or helix
selection exists.
Pretty straightforward: make the `scroll_editor` function aware of the
current vim/helix mode, and only expand the selection if a visual mode
is active.
Closes#47022
Release Notes:
- Fixed bug causing normal-mode vim/helix selections to get expanded
during `vim::Scroll` commands
---------
Co-authored-by: dino <dinojoaocosta@gmail.com>
Closes #ISSUE
Moves the settings content definitions into their own crate, so that
they are compiled+cached separately from settings, primarily to avoid
recompiles due to changes in gpui. In that vain many gpui types such as
font weight/features, and `SharedString` were replaced in the content
crate, either with `*Content` types for font/modifier things, or
`String`/`Arc<str>` for `SharedString`. To make the conversions easy a
new trait method in the settings crate named `IntoGpui::into_gpui`
allows for `into()` like conversions to the gpui types in
`from_settings` impls.
Release Notes:
- N/A
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
The default behavior for Vim search with `*` and `#` in normal mode is
to initiate a search and immediately jump to the next or previous match
respectively.
This behavior can be annoying, so Vim has many plugins to address this
specifically:
- [vim-asterisk](https://github.com/haya14busa/vim-asterisk)
-
[vim-SearchHighlighting](https://github.com/inkarkat/vim-SearchHighlighting)
- [vim-tranquille](https://github.com/RRethy/vim-tranquille)
This PR tries to emulate this behavior natively keeping up with Zed's
sane defaults and deviating from vanilla Vim when it makes sense.
Release Notes:
- Vim: `*` and `#` search doesn't jump immediately to next / previous
search.
When a recorded action moves focus away from the editor (e.g.,
`buffer_search::Deploy`), the `EndRepeat` action handler is not invoked
because is node is no longer on the dispatch path. This left
`dot_replaying` set to `true`, causing subsequent repeats to malfunction
and the `VimGlobals.pre_count` value to never be reset.
Reset `dot_replaying` as a fail-safe when the replayer exhausts its
action queue, ensuring the state is always cleaned up regardless of
whether `EndRepeat` was handled.
Release Notes:
- Fixed vim repeat (`.`) breaking when the recorded action moves focus
away from the editor
Co-authored-by: neel <neel@chot.ai>
Fixes a few cases where the commit view would layout shift as the diff
loaded. This was caused by:
- Adding the commit message buffer after all the diff files
- Using the gutter dimensions from the last frame for the avatar spacing
Release Notes:
- commit view: Fix layout shift while loading commit
---------
Co-authored-by: MrSubidubi <dev@bahn.sh>
Implements a specialized constructor `LanguageName::new_static` for
`&'static str` which reduces allocations.
`LanguageName::new` always backs the underlying `SharedString` with an
owned `Arc<str>` even when a `&'static str` is passed. This makes us
allocate each time we create a new `LanguageName` no matter what.
Creating a specialized constructor for `&'static str` allows us to
essentially construct them for free.
Additional change:
Encourages using explicit constructors to avoid needless allocations.
Currently there were no instances of this trait being called where the
lifetime was not `'static` saving another 48 locations of allocation.
```rust
impl<'a> From<&'a str> for LanguageName {
fn from(str: &'a str) -> Self {
Self(SharedString::new(str))
}
}
// to
impl From<&'static str> for LanguageName {
fn from(str: &'static str) -> Self {
Self(SharedString::new_static(str))
}
}
```
Release Notes:
- N/A
Use `MotionKind::LineWise` in both
`vim::normal::change::Vim.change_object` and
`vim::normal::yank::Vim.yank_object` when dealing with objects that
target `Mode::VisualLine`, for example, paragraphs. This fixes an issue
where yanking and changing paragraphs would not include the trailing
newline character.
Closes#28804
Release Notes:
- Fixed linewise text object operations (`yap`, `cap`, etc.) omitting
trailing blank line in vim mode
---------
Co-authored-by: dino <dinojoaocosta@gmail.com>
This bug seems to be caused by pushing an operator (i.e. `d`) followed
by a repeat (i.e. `.`) so the recording includes the push operator and
the repeat. When this is repeated (i.e. `.`) it causes an infinite loop.
This change fixes this bug by pushing a ClearOperator action if there is
an ongoing recording when repeat is called.
Release Notes:
- Fixed bug where pressing `d . .` in Vim mode would freeze the editor.
---------
Co-authored-by: dino <dinojoaocosta@gmail.com>
This PR introduces a new `MultiBufferOffset` new type wrapping size. The
goal of this is to make it clear at the type level when we are
interacting with offsets of a multi buffer versus offsets of a language
/ text buffer. This improves readability of things quite a bit by making
it clear what kind of offsets one is working with while also reducing
accidental bugs by using the wrong kin of offset for the wrong API.
This PR also uncovered two minor bugs due to that.
Does not yet introduce the MultiBufferPoint equivalent, that is for a
follow up PR.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Ben Kunkle