This PR makes it so the Storybook loads GPUI with the default features
enabled.
This fixes a panic that would occur when trying to run any of the
stories.
Release Notes:
- N/A
Sometimes, issues are created outside of issue templates (which we don't
prefer, but we can't prevent). This updates our top-ranking issues
script such that it will add `triage` and `admin read` labels to any
issue that is missing a core label, so that we don't miss the issues
when doing the next triage.
Release Notes:
- N/A
when no result found, always display `Search all files`, which is
confused.
Release Notes:
- Fixed an issue where the project search would sometimes show "Search
all files" when there were no results.
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
This does two things.
Important one: it reverts #19193, which lead to our whole process
handling breaking. When the `proxy` process was killed, it apparently
didn't close the stdout/stderr anymore, which meant we would not detect
when it died. (Watching its `status()` in the io loop also didn't work!)
We should figure out how to keep our process handling working before we
make this change in #19193, which sounds reasonable.
Second, less important thing: I think we should treat the process being
killed from a signal as non-zero, as an error.
Release Notes:
- N/A
This improves the heartbeat detection logic. We now treat any other
incoming message from the ssh remote server
as a heartbeat message, meaning that we can detect re-connects earlier.
It also changes the connection handling to await futures detached.
Co-Authored-by: Thorsten <thorsten@zed.dev>
Release Notes:
- N/A
---------
Co-authored-by: Thorsten <thorsten@zed.dev>
Co-authored-by: Antonio <antonio@zed.dev>
TL;DR: Another O(n^2) strikes.
In #19194 we received a report about a 7Mb JSON file that Zed struggles
with. Naturally this file showcased a O(n^2) in line layout; this file
has one long line.
During line layout for Mac we have to convert between UTF-16 and UTF-8
indices in the string, as CoreText works with UTF-16 and Rust strings
are UTF-8. The problem stemmed from the fact that we were re-seeking our
string converter on each glyph, which boils down to: we were reparsing
[0..curr_string_position] bytes up to full length of the string, which
is the O(n^2) in question. This PR changes this behaviour to reuse the
Index Converter if the position we're seeking to is not yet reached.
Basically, we're treating the converter as forward iterator and we try
to seek with the same iterator, if possible.
Where previously you could not even open the file in OP (within
reasonable time frame, I waited for 40 seconds before giving up), now
you can do it in.. slightly over a second. The best part is: the
experience is still not ideal. Typing in the buffer is sluggish. Still,
this is a start.
Release Notes:
- Mac: Improved performance with very long lines
This PR changes the SSH modal design so its more keyboard
navigation-friendly and adds the server nickname feature.
Release Notes:
- N/A
---------
Co-authored-by: Danilo <danilo@zed.dev>
Co-authored-by: Danilo Leal <67129314+danilo-leal@users.noreply.github.com>
This also puts the entire state of `StripeBilling` behind a `RwLock`.
When fetching the existing prices and meters, or when inserting new
ones, we acquire a write lock and hold it until the Stripe request
completes. This prevents two concurrent calls to `get_or_insert_price`
from inserting the same data twice.
Creating a new meter/price is unusual, so in practice we'll acquire a
read lock most of the time.
/cc @rtfeldman @maxdeviant
Release Notes:
- N/A
Closes#19051Closes#19182
#### How to reproduce this crash:
1. Open any file and input some ASCII characters.
2. Replace these characters with `你好`.
3. Press `backspace`.
4. Crash.
https://github.com/user-attachments/assets/ea5c5340-29a5-42c8-98c5-6e60770445a4
The issue lies with the `prefix_offset` introduced in #18858. After the
buffer is modified, this value is not always valid and may fall within a
`char boundary`, which results in a crash.
Release Notes:
- Fixed Supermaven crashing on deleting non-ASCII text
remote: Disable ControlPersist for master ssh connection
`ControlPersist=yes` combined with `ControlMaster=yes` silently forces
`ForkAfterAuthentication=yes` (even when the user has explicitly set it
to `no` - reported upstream in [0]) - and the latter makes the ssh
subprocess disappear, which makes us think that the connection died
(This is only an issue for people who have `ControlPersist=yes` in their
`ssh_config`, and perhaps the answer is "if that option breaks things,
don't use that option?" - but it's an option that makes sense _most_ of
the time, it's just in this edge-case of "creating an ssh connection
with -N and expecting the process to stay in the foreground" where it
_must_ be set to no)
I think the alternative approach is to tell people "if you want to use
persistent connections, have a separate ~/.ssh/config entry for
servername (to ssh into) and servername-no-persist (to zed into)", which
is possible, but ugh. Kind of a messy situation >.<
Tests:
- Before: Connections to my server result in "Failed to connect: ." (The
error message is attempting to show stderr, but stderr is empty)
- After: Connections to my server work reliably
[0] https://bugzilla.mindrot.org/show_bug.cgi?id=3743
Release Notes:
- N/A
- Closes#16998
This PR resolves issues with the /file and /diagnostics commands in the
assistant panel, which previously failed to display the contents of a
directory when searching for a folder instead of using the arrow button.
- Changed the format in `project.rs` (located at
`crates/project/src/project.rs`) to use `std::path::MAIN_SEPARATOR` for
cross-platform compatibility, which resolves errors encountered on
Windows that originally used the format `format!("{}/", ...)`.
Release Notes:
- N/A
Similar to a86b731038, this adds a `regex`
option to `vim::Search` command to allow disabling regex search.
Release Notes:
- Added `regex` option to `vim::Search` command to allow disabling regex
search by default in the keymap. Example usage:
```yaml
{
"context": "VimControl && !menu",
"bindings": {
"/": ["vim::Search", { "regex": false }],
}
}
```
This will allow us to compile debug builds of the remote-server for a
different architecture than the one we are developing on.
This also adds a CI step for building our remote server with minimal
dependencies.
Release Notes:
- N/A
This PR contains the following updates:
| Package | Type | Update | Change |
|---|---|---|---|
| [bytes](https://redirect.github.com/tokio-rs/bytes) |
workspace.dependencies | patch | `1.7.1` -> `1.7.2` |
---
### Release Notes
<details>
<summary>tokio-rs/bytes (bytes)</summary>
###
[`v1.7.2`](https://redirect.github.com/tokio-rs/bytes/blob/HEAD/CHANGELOG.md#172-September-17-2024)
[Compare
Source](https://redirect.github.com/tokio-rs/bytes/compare/v1.7.1...v1.7.2)
##### Fixed
- Fix default impl of `Buf::{get_int, get_int_le}`
([#​732](https://redirect.github.com/tokio-rs/bytes/issues/732))
##### Documented
- Fix double spaces in comments and doc comments
([#​731](https://redirect.github.com/tokio-rs/bytes/issues/731))
##### Internal changes
- Ensure BytesMut::advance reduces capacity
([#​728](https://redirect.github.com/tokio-rs/bytes/issues/728))
</details>
---
### Configuration
📅 **Schedule**: Branch creation - "after 3pm on Wednesday" in timezone
America/New_York, Automerge - At any time (no schedule defined).
🚦 **Automerge**: Disabled by config. Please merge this manually once you
are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the
rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update
again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check
this box
---
Release Notes:
- N/A
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzOC45Ny4wIiwidXBkYXRlZEluVmVyIjoiMzguMTE1LjEiLCJ0YXJnZXRCcmFuY2giOiJtYWluIiwibGFiZWxzIjpbXX0=-->
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
Closes#19131Closes#19039
fixes the broken auto-updater.
I had the bright idea of using streams as the most common unit of data
transfer. Unfortunately, streams are not re-usable. So HTTP redirects
that have a stream body (like our remote server and auto update
downloads), don't redirect, as they can't reuse the stream. This PR
fixes the problem and simplifies the AsyncBody implementation now that
we're not using Isahc.
Release Notes:
- N/A
This PR adjusts the billing logic to not write any records to
`billing_events` if:
- The user is staff, as we don't want to bill staff members
- Billing is disabled (we currently enable billing based on the presence
of the Stripe API key)
Release Notes:
- N/A
Marshall Bowers