This isn't quite right yet, as a proper solution would remember the
input modality at the moment of focus change, rather than at painting
time. But this gets us close enough for now.
Release Notes:
- N/A
This is the first step to allowing users to type into a numeric stepper
to set its value. This PR makes the numeric stepper take in a generic
type `T` where T: `NumericStepperType`
```rust
pub trait NumericStepperType:
Display
+ Add<Output = Self>
+ Sub<Output = Self>
+ Copy
+ Clone
+ Sized
+ PartialOrd
+ FromStr
+ 'static
{
fn default_format(value: &Self) -> String {
format!("{}", value)
}
fn default_step() -> Self;
fn large_step() -> Self;
fn small_step() -> Self;
fn min_value() -> Self;
fn max_value() -> Self;
}
```
This allows setting of step sizes and min/max values as well as making
the component easier to use.
cc @danilo-leal
Release Notes:
- N/A
---------
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
Co-authored-by: Gaauwe Rombouts <mail@grombouts.nl>
While default for ClickEvent shouldn't be used much this is helpful for
other projects using gpui besides Zed. Mainly because the orphan rule
prevents those projects from implementing their own default trait
cc: @huacnlee
Release Notes:
- N/A
Instead of a menagerie of macros for implementing `Action`, now there
are just two:
* `actions!(editor, [MoveLeft, MoveRight])`
* `#[derive(..., Action)]` with `#[action(namespace = editor)]`
In both contexts, `///` doc comments can be provided and will be used in
`JsonSchema`.
In both contexts, parameters can provided in `#[action(...)]`:
- `namespace = some_namespace` sets the namespace. In Zed this is
required.
- `name = "ActionName"` overrides the action's name. This must not
contain "::".
- `no_json` causes the `build` method to always error and
`action_json_schema` to return `None`
and allows actions not implement `serde::Serialize` and
`schemars::JsonSchema`.
- `no_register` skips registering the action. This is useful for
implementing the `Action` trait
while not supporting invocation by name or JSON deserialization.
- `deprecated_aliases = ["editor::SomeAction"]` specifies deprecated old
names for the action.
These action names should *not* correspond to any actions that are
registered. These old names
can then still be used to refer to invoke this action. In Zed, the
keymap JSON schema will
accept these old names and provide warnings.
- `deprecated = "Message about why this action is deprecation"`
specifies a deprecation message.
In Zed, the keymap JSON schema will cause this to be displayed as a
warning. This is a new feature.
Also makes the following changes since this seems like a good time to
make breaking changes:
* In `zed.rs` tests adds a test with an explicit list of namespaces. The
rationale for this is that there is otherwise no checking of `namespace
= ...` attributes.
* `Action::debug_name` renamed to `name_for_type`, since its only
difference with `name` was that it
* `Action::name` now returns `&'static str` instead of `&str` to match
the return of `name_for_type`. This makes the action trait more limited,
but the code was already assuming that `name_for_type` is the same as
`name`, and it requires `&'static`. So really this just makes the trait
harder to misuse.
* Various action reflection methods now use `&'static str` instead of
`SharedString`.
Release Notes:
- N/A
Closes#21700
Release Notes:
- Added caps lock support and show a warning if the user is entering an
SSH password with Caps Lock enabled
---------
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
Co-authored-by: 张小白 <364772080@qq.com>
Optimize away a multiplication during in the `coalesce` function. Our
goal is to check whether the sign of two floats is the same.
Instead of multiplying each `.signum()` and checking that the result is
positive, we can simply check that the signum's are the same. This
removes a float multiplication.
```rust
a.signum() * b.signum() >= 0.0
```
turns into
```rust
a.signum() == b.signum()
```
Release Notes:
- Fix documentation for `Pixels::signum`
Previously, editor elements had to listen for mouse_up events to
determine when a click had completed. This meant that they only had
access to modifier keys that were pressed during the mouse_up event.
This led to some incorrect user experiences, such as executing a
ctrl+click if the user pressed ctrl after pressing the mouse button, but
before releasing it.
This change adds a click event handler to EditorElement, and adds a
modifier() method to the ClickEvent, which only includes the modifier
keys that were pressed during both mouse down and mouse up. The code for
handling link clicks has been moved into the click event handler, so
that it's only triggered when the non-multi-cursor modifier was held for
both the mouse down and mouse up events.
Closes#12752, #16074, #17892 (the latter two seem to be duplicates of
the former!)
Release Notes:
- Fixed a bug where pressing ctrl/cmd (or other modifiers) after mouse
down but before mouse up still triggered ctrl/cmd+click behavior (e.g.
"go to definition")
There's still a bit more work to do on this, but this PR is compiling
(with warnings) after eliminating the key types. When the tasks below
are complete, this will be the new narrative for GPUI:
- `Entity<T>` - This replaces `View<T>`/`Model<T>`. It represents a unit
of state, and if `T` implements `Render`, then `Entity<T>` implements
`Element`.
- `&mut App` This replaces `AppContext` and represents the app.
- `&mut Context<T>` This replaces `ModelContext` and derefs to `App`. It
is provided by the framework when updating an entity.
- `&mut Window` Broken out of `&mut WindowContext` which no longer
exists. Every method that once took `&mut WindowContext` now takes `&mut
Window, &mut App` and every method that took `&mut ViewContext<T>` now
takes `&mut Window, &mut Context<T>`
Not pictured here are the two other failed attempts. It's been quite a
month!
Tasks:
- [x] Remove `View`, `ViewContext`, `WindowContext` and thread through
`Window`
- [x] [@cole-miller @mikayla-maki] Redraw window when entities change
- [x] [@cole-miller @mikayla-maki] Get examples and Zed running
- [x] [@cole-miller @mikayla-maki] Fix Zed rendering
- [x] [@mikayla-maki] Fix todo! macros and comments
- [x] Fix a bug where the editor would not be redrawn because of view
caching
- [x] remove publicness window.notify() and replace with
`AppContext::notify`
- [x] remove `observe_new_window_models`, replace with
`observe_new_models` with an optional window
- [x] Fix a bug where the project panel would not be redrawn because of
the wrong refresh() call being used
- [x] Fix the tests
- [x] Fix warnings by eliminating `Window` params or using `_`
- [x] Fix conflicts
- [x] Simplify generic code where possible
- [x] Rename types
- [ ] Update docs
### issues post merge
- [x] Issues switching between normal and insert mode
- [x] Assistant re-rendering failure
- [x] Vim test failures
- [x] Mac build issue
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Joseph <joseph@zed.dev>
Co-authored-by: max <max@zed.dev>
Co-authored-by: Michael Sloan <michael@zed.dev>
Co-authored-by: Mikayla Maki <mikaylamaki@Mikaylas-MacBook-Pro.local>
Co-authored-by: Mikayla <mikayla.c.maki@gmail.com>
Co-authored-by: joão <joao@zed.dev>
TODO:
- [x] Finish GPUI changes on other operating systems
This is a largely internal change to how we report data to our
diagnostics and telemetry. This PR also includes an update to our blade
backend which allows us to report errors in a more useful way when
failing to initialize blade.
Release Notes:
- N/A
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This puts the Linux platform implementation at a similar code style and
quality to the macOS platform. The largest change is that I collapsed
the `LinuxPlatform` -> `[Backend]` -> `[Backend]State` ->
`[Backend]StateInner` to just `[Backend]` and `[Backend]State`, and in
the process removed most of the `Rc`s and `RefCell`s.
TODO:
- [x] Make sure that this is on-par with the existing implementation
- [x] Review in detail, now that the large changes are done.
- [ ] Update the roadmap
Release Notes:
- N/A
This PR changes GPUI to open windows with a default size and location,
and to otherwise inherit from their spawning window.
Note: The linux build now crashes on startup.
Release Notes:
- N/A
---------
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Ezekiel Warren <zaucy@users.noreply.github.com>
Release Notes:
- Added `workspace::SendKeystrokes` to enable mapping from one key to a
sequence of others
([#7033](https://github.com/zed-industries/zed/issues/7033)).
Improves #7033. Big thank you to @ConradIrwin who did most of the heavy
lifting on this one.
This PR allows the user to send multiple keystrokes via custom
keybinding. For example, the following keybinding would go down four
lines and then right four characters.
```json
[
{
"context": "Editor && VimControl && !VimWaiting && !menu",
"bindings": {
"g z": [
"workspace::SendKeystrokes",
"j j j j l l l l"
],
}
}
]
```
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Previously it would both send the keydown *and then* the action, now
it send the action, and then because there was an action, does not send
the keydown
Co-Authored-By: Conrad Irwin <conrad@zed.dev>
Mikayla Maki