This PR refactors the highlight map capture name resolution to be faster
and more predictable. Speficically,
- it changes the capture name matching to explicit prefix matching
(e.g., `function.call.whatever.jsx` will now be matched by only
`function`, `function.call`, `function.call.whatever` and
`function.call.whatever.jsx`). This matches the behavior VSCode has
- resolving highlights is now much more efficient, as we now look up
captures in a BTreeMap as opposed to searching in a Vector for these.
This substantially improves the performance for resolving capture names
against themes. With the benchmark added here for creating the
HighlightMap, we see quite some improvements:
```
Running benches/highlight_map.rs (target/release/deps/highlight_map-f99da68650aac85b)
HighlightMap::new/small_captures/small_theme
time: [161.90 ns 162.70 ns 163.55 ns]
change: [-39.027% -38.352% -37.742%] (p = 0.00 < 0.05)
Performance has improved.
Found 3 outliers among 100 measurements (3.00%)
3 (3.00%) high mild
HighlightMap::new/small_captures/large_theme
time: [231.37 ns 233.02 ns 234.70 ns]
change: [-91.570% -91.516% -91.464%] (p = 0.00 < 0.05)
Performance has improved.
HighlightMap::new/large_captures/small_theme
time: [991.82 ns 994.94 ns 998.50 ns]
change: [-50.670% -50.443% -50.220%] (p = 0.00 < 0.05)
Performance has improved.
Found 5 outliers among 100 measurements (5.00%)
5 (5.00%) high mild
HighlightMap::new/large_captures/large_theme
time: [1.6528 µs 1.6650 µs 1.6784 µs]
change: [-91.684% -91.637% -91.593%] (p = 0.00 < 0.05)
Performance has improved.
Found 1 outliers among 100 measurements (1.00%)
1 (1.00%) low mild
```
For large themes and many capture names, the revised approach is much
faster.
With that in place, we can also add better fallbacks whenever we change
tokens, since e.g. a change from `@variable` to `@preproc` would
previously cause tokens to not be highlighted at all, whereas now we can
add fallbacks for such cases more efficiently. I'll add this later on to
this PR.
## Self-Review Checklist
<!-- Check before requesting review: -->
- [X] I've reviewed my own diff for quality, security, and reliability
- [ ] Unsafe blocks (if any) have justifying comments
- [ ] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [X] Tests cover the new/changed behavior
- [X] Performance impact has been considered and is acceptable
Release Notes:
- Improved resolution speed of theme highlight capture names. This might
change highlighting in some rare edge cases, but should overall make
highlighting more predicatable. Theme captures will now follow a strict
prefix matching, so e.g. function.call.decorator.jsx` will now be
matched by only `function`, `function.call`, `function.call.decorator`
and `function.call.decorator.jsx` with the most specific capture always
taking precedence.
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Gaauwe Rombouts <mail@grombouts.nl>
Closes#52115
## Context
Removes the third party edit prediction integration for Sweep AI ahead
of their servers shutting down.
This PR will not affect those who are already use or plan to use their
open weighted models. The code removed by this PR was required for
integrating with their proprietary API.
## Self-Review Checklist
<!-- Check before requesting review: -->
- [x] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [x] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable
Release Notes:
- Removed support for using the Sweep AI edit prediction provider
through their proprietary API, as the servers are shutting down
https://discord.com/channels/1100625416022138902/1100625417272045639/1480644297903575142,
https://x.com/wwzeng1/status/2033302698360180949
Follow up to bzip support to clean up some of this code
## Self-Review Checklist
<!-- Check before requesting review: -->
- [x] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [x] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable
Release Notes:
- N/A
## Summary
- Added `TarBz2` variant to `AssetKind` enum for `.tar.bz2` / `.tbz2`
archives
- Implemented `extract_tar_bz2` using the `bzip2` feature of
`async-compression` (already a workspace dependency, just enabled the
feature flag)
- Wired up both streaming and file-based extraction paths in
`github_download.rs`
- Added `.tar.bz2` / `.tbz2` URL detection in both
`LocalExtensionArchiveAgent` and `LocalRegistryArchiveAgent`
This unblocks ACP registry entries (like Goose) that only ship
`.tar.bz2` archives.
Reference: https://github.com/block/goose/issues/8047
## Test plan
- [ ] Verify `cargo check` and `clippy` pass (confirmed locally)
- [ ] Test downloading an ACP agent that ships a `.tar.bz2` archive
(e.g., Goose)
- [ ] Verify existing `.tar.gz` and `.zip` agent downloads still work
Release Notes:
- Added support for `.tar.bz2` archives in ACP agent server downloads,
unblocking registry entries like Goose that only ship bzip2-compressed
tarballs.
---------
Co-authored-by: Ben Brandt <benjamin.j.brandt@gmail.com>
This PR moves the `CompletionIntent` enum from the `cloud_llm_client`
crate to the `language_model` crate, as it is no longer part of the
Cloud interface.
Release Notes:
- N/A
This PR adds support to paste external files and directories in Agent
Panel, along with the existing image paste path.
Release Notes:
- Added support for pasting files and folders into the Agent Panel.
## Context
Fixes some issues I ran into when running this on a remote machine.
## Self-Review Checklist
<!-- Check before requesting review: -->
- [x] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [x] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable
Release Notes:
- N/A
## Context
Recently, we put bsn in the list of "macros to not reparse as rust"
(#51353).
We have since updated tree-sitter-rust to better handle the `@"string"`,
`:"string"`, etc cases, and can un-list bsn from the special casing.
on main, the highlighting currently looks like this for `bsn` and for
`not` (represents "other macros"). Note the `:"player.bsn"` string is
re-parsed as rust tokens.
<img width="1728" height="1084" alt="Screenshot 2026-03-23 at 9 33
35 AM"
src="https://github.com/user-attachments/assets/94ea5a6d-228b-44dd-857b-c41edcbd9af0"
/>
This pr, plus the tree-sitter-rust updates results in better handling by
default.
<img width="1728" height="1084" alt="Screenshot 2026-03-23 at 11 38
47 AM"
src="https://github.com/user-attachments/assets/fb6f71e3-7bcf-4c06-8e84-ce0823010b2e"
/>
Release Notes:
- N/A
Co-authored-by: Smit Barmase <heysmitbarmase@gmail.com>
We've decided to remove rodio backend for audio as we didn't have time
to get it to a nice spot. I personally believe we should eventually
re-land it (the composable pipelines are quite nice!), but given that we
need audio to work, this seems like the best way forward. We won't have
to worry about all the ways in which the legacy pipeline interoped with
rodio's.
## Self-Review Checklist
<!-- Check before requesting review: -->
- [x] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [x] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable
Release Notes:
- audio: Experimental rodio audio backend has been removed.
---------
Co-authored-by: Smit Barmase <heysmitbarmase@gmail.com>
Co-authored-by: Yara <git@yara.blue>
Before you mark this PR as ready for review, make sure that you have:
- [x] Added a solid test coverage and/or screenshots from doing manual
testing
- [x] Done a self-review taking into account security and performance
aspects
- [x] Aligned any UI changes with the [UI
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
Per Opencode's website:
> Zen gives you access to a curated set of AI models that OpenCode has
tested and benchmarked specifically for coding agents. No need to worry
about inconsistent performance and quality, use validated models that
work.
> - [x] Testing select models and consulting their teams
> - [x] Working with providers to ensure they're delivered properly
> - [x] Benchmarking all model-provider combinations we recommend
There are so many models available, but only a few work well with coding
agents. Most providers configure them differently with varying results.
The models under the Zen umbrella typically have a more reliable
token(s) per second speed with minimal outages. The opencode ecosystem
has improved my workflow if not many others' !
Release Notes:
- Added [Opencode Zen](https://opencode.ai/zen) to list of providers
---------
Co-authored-by: Ben Brandt <benjamin.j.brandt@gmail.com>
Co-authored-by: Bennet Bo Fenner <bennetbo@gmx.de>
Closes#43162
Implements the OAuth 2.0 Authorization Code + PKCE authentication flow
for remote MCP servers using Streamable HTTP transport, as specified by
the [MCP auth
specification](https://modelcontextprotocol.io/specification/2025-03-26/basic/authorization).
Previously, connecting to a remote MCP server that required OAuth would
silently fail with a timeout — the server's 401 response was never
handled. Now, Zed detects the 401, performs OAuth discovery, and guides
the user through browser-based authentication.
Step-up authentication and pre-registered clients are not in scope for
this PR, but will be done as follow-ups.
## Overview
- **401 detection** — When the HTTP transport receives a 401 during
server startup, it surfaces a typed `TransportError::AuthRequired` with
parsed `WWW-Authenticate` header info.
- **OAuth discovery** — Protected Resource Metadata (RFC 9728) and
Authorization Server Metadata (RFC 8414) are fetched to locate the
authorization and token endpoints.
- **Client registration** — Zed first tries CIMD (Client ID Metadata
Document) hosted at `zed.dev`. If the server doesn't support CIMD, falls
back to Dynamic Client Registration (DCR).
- **Browser flow** — A loopback HTTP callback server starts on a
preferred fixed port (27523, listed in the CIMD), the user's browser
opens to the authorization URL, and Zed waits for the callback with the
authorization code.
- **Token exchange & persistence** — The code is exchanged for
access/refresh tokens using PKCE. The session is persisted in the system
keychain so subsequent startups restore it without another browser flow.
- **Automatic refresh** — The HTTP transport transparently refreshes
expired tokens using the refresh token, and persists the updated session
to the keychain.
## UI changes
- Servers requiring auth show a warning indicator with an
**"Authenticate"** button
- During auth, a spinner and **"Waiting for authorization..."** message
are shown
- A **"Log Out"** option is available in the server settings menu for
OAuth-authenticated servers
- The configure server modal handles the auth flow inline when
configuring a new server that needs authentication.
Release Notes:
- Added OAuth authentication support for remote MCP servers. Servers
requiring OAuth now show an "Authenticate" button when they need you to
log in. You will be redirected in your browser to the authorization
server of the MCP server to go through the authorization flow.
---------
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Swaps the `arrayvec` dependency for `heapless`, as the `heapless`
library allows changing the type used for the `len` field, which
`arrayvec` hard-codes to `usize`. This means that, for all the
`ArrayVec`s in Zed, we can save 7 bytes on 64 bit platforms by just
storing the length as a `u8`.
I have not benchmarked this change locally, as I don't know what
benchmarking tools are in this project.
As a small bit of context, I wrote the PR to `heapless` to add this
`LenT` generic after seeing a PR on the `arrayvec` crate that seems to
be dead now. Once I saw some of Zed's blog posts about the `rope` crate
and noticed the usage of `arrayvec`, I thought this might be a welcome
change.
Release Notes:
- N/A
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Release Notes:
- Fixed a weird niche interaction between niri and nixos that broke
screensharing
---------
Co-authored-by: Jakub Konka <kubkon@jakubkonka.com>
## Context
Brings in support for the new terminal auth methods. Currently behind
AcpBeta feature flag while the RFD stabilizes
## Self-Review Checklist
<!-- Check before requesting review: -->
- [x] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [x] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable
Release Notes:
- N/A
This PR adjusts the logic that was added in #45166 to just apply to the
specific case of interacting with the command palette in Vim and Helix
modes (hereafter referred to collectively as "Vim mode").
In that PR, we would suppress the auto-save on focus change for _any_
modal in the workspace, regardless of whether we were actually in Vim
mode or not. This would cause issues where moving between files some
other way—such as the tab switcher or the file finder—would cause the
buffers to never be saved.
We now only suppress the auto-save on focus loss behavior when in Vim
mode and the active modal is the command palette. In all other cases, we
save the file.
Closes https://github.com/zed-industries/zed/issues/47968.
Supersedes https://github.com/zed-industries/zed/pull/51801 and
https://github.com/zed-industries/zed/pull/51802.
Note: the way we are identifying the active modal as the command palette
isn't the best, but @bennetbo and I didn't have any other cleaner
solutions. It's a bit tricky, as the logic lives in the `workspace`,
which isn't able to know about the `CommandPalette` due to
`command_palette` depending on `workspace`. There may be some other way
we could achieve this with more indirection, but it's unclear whether it
would be worth it at this time.
Release Notes:
- Changed `{ "autosave": "on_focus_change" }` to now always save on
focus loss, except for when activating the command palette when in
Vim/Helix mode.
Co-authored-by: Bennet Bo Fenner <bennetbo@gmx.de>
Closes#50524
When a file is deleted while project search results are displayed, the
deleted file's buffer was kept alive by the search multibuffer and would
reappear on re-search.
**Root cause:** `Search::into_handle()` treated buffers without a
`project_entry_id()` (which happens when `DiskState::Deleted`) as
"unnamed buffers" and fed them
directly into the search pipeline. The multibuffer's strong
`Entity<Buffer>` reference kept the buffer alive.
**Fix:**
- Filter deleted-file buffers from search candidates in `into_handle()`
and `all_loaded_buffers()`
- Subscribe to `FileHandleChanged` events on the search multibuffer to
proactively remove deleted files from existing results
Before you mark this PR as ready for review, make sure that you have:
- [x] Added a solid test coverage and/or screenshots from doing manual
testing
- [x] Done a self-review taking into account security and performance
aspects
- [ ] Aligned any UI changes with the [UI
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
### Video:
https://drive.google.com/file/d/1pEz6JywFcZlz8aiXbLOxIdj84SQWLIiF/view?usp=sharing
Release Notes:
- Fixed deleted files persisting in project search results
- [x] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [x] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable
Release Notes:
- N/A
* [x] Display original project name as root folder in project panel,
titlebar
* [x] When manually creating worktrees, ensure final path component is
original project name
* [x] Display original project name, worktree name, and branch name in
titlebar
* [x] Only show main checkout in project switcher
Release Notes:
- N/A *or* Added/Fixed/Improved ...
---------
Co-authored-by: Richard Feldman <oss@rtfeldman.com>
- Add `project_panel::undo::UndoManager` with a bounded operation stack
to track and revert project panel operations
- Support undoing file and directory creation, renaming, moving, pasting
and drag-and-drop operations
- Revert batch operations sequentially in reverse order to handle
dependencies between them
- Show an error notification when one or more undo operations fail
- Add "Undo" entry to the project panel context menu, disabled when
there is nothing to undo
- Gate the feature behind the `project-panel-undo-redo` feature flag
Ref: #5039
Release Notes:
- N/A
---------
Signed-off-by: Marco Mihai Condrache <52580954+marcocondrache@users.noreply.github.com>
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: dino <dinojoaocosta@gmail.com>
All of the important changes are in
[`db.rs`](https://github.com/zed-industries/zed/pull/51809/changes#diff-2f644eab943bfa58feec29256281a3d9e8d4d7784cd34783e845af8beb15b16d).
Consider reading the commit log in order to review this work.
The DB crate's macro and API was changed to fix flakiness observed in
the MultiWorkspace tests when run locally. This flakiness was caused by
a shared `static LazyLock`, that caused concurrent test runs to interact
with the same underlying in-memory database. This flakiness wasn't
possible on CI due to it's usage of `cargo nextest`, whose
process-per-test approach masked this problem.
Essentially, I've changed the `static_connection` macro to remove the
static database variable and redone the internal model. Now, all
database types are thin wrappers around a generic `AppDatabase`. The
`AppDatabase` collects all of the individual table's migrations via the
`inventory` crate, and so only runs the migrations once on startup,
rather than a dozen times on startup.
The new API requires a `cx` so that we can replace the database returned
at runtime, rather than relying exclusively on a process-global
thread-local. However, we are still using a `static LazyLock` so that we
only need to take an `&App`, instead of an `&mut App`. These databases
types are `Clone + Send + Sync`, so you can easily capture-and-move the
database into background tasks and other places that don't have a `cx`.
For tests that require database isolation, it is now possible to set
their own database in init. See
[`workspace::init_test`](https://github.com/zed-industries/zed/pull/51809/changes#diff-041673bbd1947a35d45945636c0055429dfc8b5985faf93f8a8a960c9ad31e28R13610),
for the flakiness fix.
Best part, this change should be entirely compiler driven, so the Zed
agent was able to make the app-wide refactor easily.
Before you mark this PR as ready for review, make sure that you have:
- [x] Added a solid test coverage and/or screenshots from doing manual
testing
- [x] Done a self-review taking into account security and performance
aspects
- [x] Aligned any UI changes with the [UI
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
Release Notes:
- N/A
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
This PR updates the pet dependency to incorporate performance
improvements from upstream.
Related Upstream Changes:
- Issue: microsoft/python-environment-tools#369
- PR: microsoft/python-environment-tools#370
Updating pet reduces toolchain discovery time in WSL environments,
specifically when Conda is installed on the host Windows system. In my
testing, the time from clicking the toolchain button to the list
appearing was reduced by approximately 2 seconds.
While this is a notable improvement, discovery in WSL remains slightly
slower than in native development or remote Linux environments, where
toolchains are typically loaded near-instantaneously.
Before you mark this PR as ready for review, make sure that you have:
- [x] Added a solid test coverage and/or screenshots from doing manual
testing (no need)
- [x] Done a self-review taking into account security and performance
aspects
- [x] Aligned any UI changes with the [UI
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
Release Notes:
- Improved python toolchain discovery under WSL environment
- Selection/focus improvements (reduces flickers, move selection more
correctly throughout the list)
- Adds open folder button in the sidebar header
- Fixes sidebar header design, including the thread view one, too
- Fixes behavior of cmd-n when focused in the sidebar
- Changes the design for the "new thread" button in the sidebar and adds
a preview of the prompt on it
- Rename items in the "start thread in" dropdown
Release Notes:
- N/A
---------
Co-authored-by: cameron <cameron.studdstreet@gmail.com>
This PR bumps the version of the GLSL extension to v0.2.2.
Release Notes:
- N/A
Co-authored-by: zed-zippy[bot] <234243425+zed-zippy[bot]@users.noreply.github.com>
Closes#43329
## Summary
This fixes `path:line:column` navigation for files containing non-ASCII
text.
Before this change, open path flows were passing the external column
directly into `go_to_singleton_buffer_point`. That happened to work for
ASCII, but it was wrong for Unicode because external columns are
user-visible character positions while the editor buffer stores columns
as UTF-8 byte offsets.
This PR adds a shared text layer conversion for external row/column
coordinates and uses it in the affected open-path flows:
- file finder navigation
- recent project remote connection navigation
- recent project remote server navigation
It also adds regression coverage for the Unicode case that originally
failed.
As a small - necessary - prerequisite, this also adds
`remote_connection` test support to `file_finder`'s dev-deps so the
local regression test can build and run on this branch. That follows the
same feature mismatch pattern previously fixed in #48280. I wasn't able
to locally verify the tests/etc. w/o the addition... so I've rolled it
into this PR. Tests are green.
The earlier attempt in #47093 was headed in the right direction, but it
did not land and did not include the final regression coverage requested
in review.
## Verification
- `cargo fmt --all -- --check`
- `./script/clippy -p text`
- `./script/clippy -p file_finder`
- `./script/clippy -p recent_projects`
- `cargo test -p file_finder --lib --no-run`
- `cargo test -p file_finder
file_finder_tests::test_row_column_numbers_query_inside_file -- --exact`
- `cargo test -p file_finder
file_finder_tests::test_row_column_numbers_query_inside_unicode_file --
--exact`
- `cargo test -p text
tests::test_point_for_row_and_column_from_external_source -- --exact`
## Manual
I reproduced locally on my machine (macOS) w/ a stateless launch using a
Unicode file (Cyrillic)
Before:
- `:1:5` landed too far left
- `:1:10` landed around the 4th visible Cyrillic character
After:
- `:1:5` lands after 4 visible characters / before the 5th
- `:1:10` lands after 9 visible characters / before the 10th
Release Notes:
- Fixed `path:line:column` navigation so non-ASCII columns land on the
correct character.
---------
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
This PR bumps the version of the HTML extension to v0.3.1.
Release Notes:
- N/A
Co-authored-by: zed-zippy[bot] <234243425+zed-zippy[bot]@users.noreply.github.com>
Closes https://github.com/zed-industries/zed/discussions/49740
Adds optional file and folder icons to the Git panel so its file list is
easier to scan, especially in larger repositories.
- add folder icons for Git panel entries
- add Git panel settings for file and folder icon visibility
---
Release Notes:
- Made the Git Panel aware of icon themes.
- Added the ability to render file type icons in the Git panel.
---------
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Closes#51339
This should address issues with too new libstdc++.so on older/more
conservative distros such as RHEL9.
Release Notes:
- Relaxed requirement for libstdc++.so available on Linux distros.
Closes#46307
Before you mark this PR as ready for review, make sure that you have:
- [ ] Added a solid test coverage and/or screenshots from doing manual
testing
- [X] Done a self-review taking into account security and performance
aspects
- [ ] Aligned any UI changes with the [UI
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
Release Notes:
- Improved compatibility with mounted VHDs on Windows.
---------
Co-authored-by: John Tur <john-tur@outlook.com>
Follow up to https://github.com/zed-industries/zed/pull/51384
This PR fixes the settings UI rendering of this setting by adding a
default value and also wraps it in the feature flag (only the settings
UI rendering), given it's not widely available just yet.
Release Notes:
- N/A
This PR bumps the version of the GLSL extension to v0.2.1.
Release Notes:
- N/A
Co-authored-by: zed-zippy[bot] <234243425+zed-zippy[bot]@users.noreply.github.com>
This will allow us to also use the workflows for this repository, which
will especially come in handy once we revisit provider extensions.
Not perfect, as we will trigger some failed workflows for extensions
that were just added
Release Notes:
- N/A
