Closes #ISSUE
Allows tabbing through everything in all three pages. Until #35075 is
merged it is not possible to actually "click" tab focused buttons with
the keyboard.
Additionally adds an action `onboarding::Finish` and displays the
keybind. The action corresponds to both the "Skip all" and "Start
Building" buttons, with the keybind displayed similar to how it is for
the page nav buttons
Release Notes:
- N/A *or* Added/Fixed/Improved ...
---------
Co-authored-by: MrSubidubi <finn@zed.dev>
This only works after a delay in most situations because of the all
chorded `cmd-k` mappings in the so disable them for now.
Reported by @jer-k:
https://x.com/J_Kreutzbender/status/1951033355434336606
Release Notes:
- Undo mapping of `cmd-k` for Git Panel in default Jetbrains keymap
(thanks [@jer-k](https://github.com/jer-k))
"Settings" is the terminology we use in the agent panel, thus having the
action use "configuration" makes it harder for folks to find this either
via the command palette or the keybinding editor UI in case they'd like
to change it.
Release Notes:
- agent: Renamed the "open configuration" action to "open settings" for
better discoverability and consistency
Follow-up to #26114
- Ensure that the previous commit message is filled in when toggling on
amend mode from the context menu
- Fix keybinding flicker in context menu
Release Notes:
- N/A
Closes#34763
Release Notes:
- Improved insert in `helix_mode` when a selection exists to better
match helix's behavior: collapse selection to avoid replacing it
- Improved append (`insert_after`) to better match helix's behavior:
move cursor to end of selection if it exists
This change dims rows in the keymap editor for which the corresponding
keybind is overridden by other keybinds coming from higher priority
sources.
Release Notes:
- N/A
Change channel reorganization (move up/down) from `cmd-up/down` (mac) /
`ctrl-up/down` (linux) to `alt-up/down` (both) to match moving lines in
the editor.
Also fix an issue where if you selected channels using down/up in the
filter field, the movement shortcuts would not work (`editing` vs
`not_editing`).
Release Notes:
- N/A
Make the git blame popover available via the keymap by making it an
action. The blame popover stays open after being shown via the action,
similar to the `editor::Hover` action.
I added a default vim-mode key binding for `g b`, which goes in hand
with `g h` for hover. I'm not sure what the keybind would be for regular
layouts, if any would be set by default.
I'm opening this as a draft because I coludn't figure out a way to
position the popover correctly above/under the cursor head. I saw some
uses of `content_origin` in other places for calculating absolute pixel
positions, but I'm not sure how to make use of it here without doing a
big refactor of the blame popover code 🤔. I would appreciate some
help/tips with positioning, because it seems like the last thing to
implement here.
Opening as a draft for now because I think without the correct
positioning this feature is not complete.
Closes https://github.com/zed-industries/zed/discussions/26447
Release Notes:
- Added `editor::BlameHover` action for showing the git blame popover
under the cursor. By default bound to `ctrl-k ctrl-b` and to `g h` in
vim mode.
Closes: https://github.com/zed-industries/zed/issues/34780
Also relocated undo/redo selection in the keymap (no-op) as they are
from Sublime, not VSCode.
Release Notes:
- vim: Fixed an issue so `ctrl-w` / `ctrl-h` and `ctrl-u` work in
pickers on Linux when Vim mode is enabled.
Supersedes: #34242
Creates an `ActionArgumentsEditor` that implements the required logic to
have a JSON language server run when editing keybinds so that there is
auto-complete for action arguments.
This is the first time action argument schemas are required by
themselves rather than inlined in the keymap schema. Rather than add all
action schemas to the configuration options we send to the JSON LSP on
startup, this PR implements support for the
`vscode-json-language-server` extension to the LSP whereby the server
will request the client (Zed) to resolve URLs with URI schemes it does
not recognize, in our case `zed://`. This limits the impact on the size
of the configuration options to ~1KB as we send URLs for the language
server to resolve on demand rather than the schema itself. My
understanding is that this is how VSCode handles JSON schemas as well. I
plan to investigate converting the rest of our schema generation logic
to this method in a follow up PR.
Co-Authored-By: Cole <cole@zed.dev>
Release Notes:
- N/A *or* Added/Fixed/Improved ...
When `use_modifier_to_send` is turned on, holding `cmd`/`ctrl` is
necessary to send a message in the agent panel. Text threads already use
`cmd-enter` by default to submit a message, and it was done this way to
have the usual text editing bindings not taken over when writing a
prompt, sort of stimulating more thoughtful writing. While `enter` to
send is still somewhat a huge pattern in chat-like LLM UIs, it still
makes sense to allow this for the new agent panel... hence the existence
of this setting now!
Release Notes:
- agent: Added the `use_modifier_to_send` setting, which makes holding a
modifier (`cmd`/`ctrl`), together with `enter`, required to send a new
message.
Now ! means "no ancestors matches this", and > means "any descendent"
not "any child".
Updates #34570
Co-authored-by: Ben Kunkle <ben@zed.dev>
Release Notes:
- *Breaking change*. The context predicates in the keymap file now
handle ! and > differently. Before this change ! meant "this node does
not match", now it means "none of these nodes match". Before this change
> meant "child of", now it means "descendent of". We do not expect these
changes to break many keymaps, but they may cause subtle changes for
complex context queries.
---------
Co-authored-by: Ben Kunkle <ben@zed.dev>
Closes#34111
In Helix mode, the `;` key should collapse the current selection without
moving the cursor. I've added a new action `vim::HelixCollapseSelection`
to support this behavior.
https://github.com/user-attachments/assets/1a40821a-f56f-456e-9d37-532500bef17b
Release Notes:
- Added `;` key binding to collapse the current text selection in Helix
mode
This is following feedback from folks that were searching the "close
others" action, available in the tab's context menu, and not finding it
because it was actually named "close inactive", which was confusing. So,
this PR makes sure the tab's menu item and the action have consistent
naming.
Release Notes:
- Rename "CloseInactiveItems" action to "CloseOtherItems" for naming
consistency.
Closes #ISSUE
Defines keybindings for `keymap_editor::EditBinding` and
`keymap_editor::CreateBinding`, making sure those actions are used in
tooltips.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
---------
Co-authored-by: Finn <dev@bahn.sh>
Adds keyboard navigation to the keybind edit modal. Using up/down arrows
to select the previous/next input editor, and `cmd-enter` to save +
`escape` to exit
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Closes #ISSUE
Changes direction on the design of the keystroke input. Due to MacOS
limitations, it was decided that the complex repeat keystroke logic
could be avoided by limiting the number of keystrokes so that accidental
repeats were less damaging to ux. This PR follows up on the design pass
in #34437 that assumed these changes would be made, hooking up actions
and greatly improving the keyboard navigability of the keystroke input.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
This PR adds a `severity` argument so severity can be defined when
navigating through diagnostics. This allows keybinds like the following:
```json
{
"] e": ["editor::GoToDiagnostic", { "severity": "error" }],
"[ e": ["editor::GoToDiagnostic", { "severity": "error" }]
}
```
I've added test comments and a test. Let me know if there's anything
else you need!
Release Notes:
- Add `severity` argument to `editor::GoToDiagnostic`,
`editor::GoToPreviousDiagnostic`, `project_panel::SelectNextDiagnostic`
and `project_panel::SelectPrevDiagnostic` actions
This fixes a bug on linux where repeated presses of p while holding down
the ctrl modifier navigates through options in reverse.
Closes#34379
The main issue is the default biding of ctrl-p on linux is
menu::SelectPrevious hence in context "context": "FileFinder ||
(FileFinder > Picker > Editor)" it would navigate in reverse
Release Notes:
- Fixed `file_finder::Toggle` on Linux not scrolling forward
Cole Miller