Closes#49653
Before you mark this PR as ready for review, make sure that you have:
- [x] screen record added
- [x] Done a self-review taking into account security and performance
aspects
- [x] No UI change
The original `refresh_matching_bracket_highlights` method always
performed a clear --> highlight procedure, even when the bracket
positions hadn't changed, causing the highlights to flicker. Normally,
for single quotes or brackets, the flickering area is small and hard to
notice (though visible if you pay close attention), but for Python
docstrings, the three quotes create a larger highlighted area, making
this issue much more apparent.
After fix:
https://github.com/user-attachments/assets/bcd9b464-0def-438d-86b3-7e6b3779b5c6
Release Notes:
- Fixed bracket highlights flickering when editing inside brackets
For inverted diff APIs like `hunks_intersecting_base_text_range`, we
need a snapshot of the main buffer to use as context to compare hunk
anchors, convert anchors to points, etc. Previously, we were always
using a snapshot of the main buffer at the time when the diff was
calculated. This worked well for the hunks of the primary `BufferDiff`,
but it's not valid when the diff also has a secondary set of hunks,
because those hunks are recalculated on their own schedule--so it's
possible for the hunks of the secondary diff to contain anchors that are
newer than the original buffer snapshot that was taken at the time the
primary diff hunks were last calculated. This caused a panic when using
these anchors with the original buffer snapshot.
This PR fixes the issue by using the same approach for inverted diffs as
for non-inverted diffs at the multibuffer level: we take a snapshot of
the main buffer at the time when we snapshot the diff state (including
the diff itself), guaranteeing that that snapshot will be new enough to
resolve all the anchors included in both the primary diff and the
secondary diff.
Closes ZED-54J
Release Notes:
- Fixed a panic that could occur when using the branch diff in split
view mode.
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
When using the split view, if the project diff inserts excerpts for the
same buffer using two different `PathKey`s, we panic inside
`LhsEditor::update_path_excerpts_from_rhs` because of an implicit
assumption that `excerpts_for_path()` and `excerpts_for_buffer()` return
the same number of values. This PR addresses that by ignoring any
excerpts for the given buffer that have a different path key from the
provided one.
Release Notes:
- Fixed a crash when using the split diff view.
Co-authored-by: Jakub Konka <kubkon@jakubkonka.com>
Co-authored-by: Eric <eric@zed.dev>
When a buffer is folded in the split diff view and then removed from the
multibuffer (via `remove_excerpts_for_path`), the block map's
`folded_buffers` set retains a stale entry for that buffer ID. Later,
when the split view syncs folded state from the RHS display map to the
LHS, it tries to look up the companion mapping for this stale buffer and
fails because the companion no longer tracks a buffer that's been
removed from the multibuffer.
This originally caused a panic via `.expect()`. This PR:
1. Converts the panic into graceful handling by skipping unmapped
buffers.
2. Actively removes stale entries from `folded_buffers` so they don't
persist as ghost state — ensuring that if the same buffer is later
re-added, it won't incorrectly appear as folded.
3. Adds a regression test covering the full lifecycle: fold → remove →
split → re-add → assert both LHS and RHS report the buffer as not
folded.
Release Notes:
- Fixed a crash in split diff view when a folded buffer was removed and
re-added.
This tackles another issue where we would incorrectly show two absolute
line numbers with relative line numbering enabled when it really should
only have been the current active line number.
Sadly, no tests rn for this as we would need a better test infra for
that to properly catch/test this bug. But with the refactored logic, I
think this is easier to understand at glance, so at least theres that
Release Notes:
- Fixed an issue with relative line numbers where some rows would be
missing their relative line number with deleted hunks showing.
Repro steps:
1. Make a Rust file and check it in to git
2. Delete a lot of the file
3. Expand all the diffs (cmd+")
4. Select larger syntax node (ctrl+cmd+right)
5. Collapse all the diffs
6. Select smaller syntax node (ctrl+cmd+left)
7. Panic!
The problem was we were using byte offsets instead of anchors so after
we shrank the buffer by collapsing diffs we'd be pointing past the end
of it.
Release notes:
- N/A
* Update the font weight used in the Agent Panel's editor to respect the
`buffer_font_weight` setting.
* Update the font weight used in the Command Palette to use the
`ui_font_weight` setting value, seeing as the command palette is using
the `ui_font` settings for the font family and features
* Update the font weight used in the popovers to match the
`buffer_font_weight`, as it's also using the buffer font family and
features
* Update the `LabelLike.buffer_font` method in order to correctly set
the font weight, which fixes the font weight used in the file header
when displaying a multibuffer editor
Release Notes:
- Fixed incorrect font weight in the Command Pallete input
- Fixed missing font weight the Agent Panel's buffer
- Fixed missing font weight the Hover Popover
- Fixed missing font weight in Markdown's code block and inline code
---------
Co-authored-by: Zed Zippy <234243425+zed-zippy[bot]@users.noreply.github.com>
This reverts commit e477b545b7.
Needs 2 more fixes:
* enter does not move to the first excerpt anymore
* there could be situations when a narrowed search does not decrease the
excerpt enough to see the result onscreen
Release Notes:
- N/A
Ensure that editing one tag in a linked pair correctly mirrors the change
to the other tag for Vim delete/change/substitute commands, visual
mode operations, and the standard editor delete action.
Extract a `LinkedEdits` struct to deduplicate linked edit collection and
application across `handle_input`, `replace_selections`, `do_completion`,
`backspace`, and `delete`. Introduce `linked_edits_for_selections` as a
shared helper for building linked edits from the current selections.
Closes#35941
Release Notes:
- Fixed linked edits for delete/change/substitute commands so tag pairs
stay in sync.
---------
Co-authored-by: dino <dinojoaocosta@gmail.com>
Every yield will cause the background task to get rescheduled causing
additional thread/context switching, so doing so for every wrapped row
is a bit excessive
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Add `agent_worktree_directory` to `GitSettings` for configuring where
agent worktrees are stored (default: Zed data dir). Remove `Copy` derive
from `GitSettings`/`GitContentSettings` (incompatible with String field)
and fix downstream `.as_ref().unwrap()` call sites.
Define `AgentGitWorktreeInfo` (branch, worktree_path, base_ref) and add
it to `DbThread` + `DbThreadMetadata` for persistence and session list
display.
Closes AI-33
Release Notes:
- N/A
- Reduce some re-allocations in `text_anchors_to_visible_anchors` and
`refresh_semantic_tokens`
- Process `raw_to_buffer_semantic_tokens` work on the background thread
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Seems that `SmallVec::clone` is pretty expensive in a generic case, and
specialising it improves the performance quite a bit!
Release Notes:
- Improved performance of different building blocks within the
MultiBuffer.
---------
Co-authored-by: Lukas Wirth <lukas@zed.dev>
Replaces a bunch of `impl FnMut` parameters with `&mut dyn FnMut` for
functions where this is the sole generic parameter.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Reuses the new multi buffer api from
https://github.com/zed-industries/zed/pull/49349 for inlay hints
Release Notes:
- Reduced occasional stuttering coming from inlay hints in large
multibuffers
Currently, the next chunk is generated by traversing all characters of
the current folded chunk until a tab is found. Since we already have
bitmasks for characters and tabs, we can also propagate the newlines
bitmap from the rope and use it to make this computation O(1) in all
cases.
I haven’t run benchmarks yet.
Release Notes:
- N/A
- Defer syncing block maps from `set_companion`, eliminating some
redundant recomputations
- Emit one large multibuffer edit from `set_show_deleted_hunks` instead
of many small edits, to avoid bad case for block map
This cuts hangs roughly in half when toggling between views in a large
diff (1000 commits from the chromium repository).
<!-- Before you mark this PR as ready for review, make sure that you
have:
- [ ] Added a solid test coverage and/or screenshots from doing manual
testing
- [ ] Done a self-review taking into account security and performance
aspects
- [ ] Aligned any UI changes with the [UI
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
-->
Release Notes:
- Improved performance with large diffs when toggling between diff
views.
---------
Co-authored-by: Jakub Konka <kubkon@jakubkonka.com>
Co-authored-by: Lukas Wirth <lukas@zed.dev>
Closes #ISSUE
Before you mark this PR as ready for review, make sure that you have:
- [ ] Added a solid test coverage and/or screenshots from doing manual
testing
- [ ] Done a self-review taking into account security and performance
aspects
- [ ] Aligned any UI changes with the [UI
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
Release Notes:
- Improved the behavior of the `vim: join lines` and `editor: join lines`. Comment and other language specific line prefixes are now stripped from the join line
Switches `newline_below` from adding a newline to the start of the next
line in a multibuffer, to appending a newline at the end of the
selections current lines. This keeps the insertion within the excerpt of
the selection rather than adding a newline to the excerpt below.
Closes#47965
Before you mark this PR as ready for review, make sure that you have:
- [x] Added a solid test coverage and/or screenshots from doing manual
testing
- [x] Done a self-review taking into account security and performance
aspects
- [x] Aligned any UI changes with the [UI
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
Release Notes:
- Fixed `editor::NewlineBelow` adding a newline to the next multibuffer
excerpt when selection is at the end of an excerpt
Reverts the editor's paragraph navigation behavior that was changed in
#47734. Whitespace-only lines are now treated as paragraph boundaries
again for non-vim mode users.
Vim mode retains its own implementation where only truly empty lines
are paragraph boundaries.
Release Notes:
- Fixed editor paragraph navigation to treat whitespace-only lines as
paragraph boundaries again
---------
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
Co-authored-by: dino <dinojoaocosta@gmail.com>
Our strategy for keeping excerpts in sync between the two sides of the
split diff is generally
- mutate the excerpts on the RHS
- pull out the new excerpts for the affected path from the RHS
- translate those ranges to the LHS
- update the LHS excerpts with those ranges
But this can break down when the translated ranges overlap on the LHS
despite the original ranges not overlapping on the RHS. This can happen,
for example, when a large deletion in a file crosses several excerpt
boundaries. It's rare because normally excerpt boundaries in the project
diff and branch diff are adjusted to keep entire diff hunks in view, but
we defer this for dirty files, so it's not hard to trigger it when using
the agent or editing an individual file while the diff is open in
another tab.
Release Notes:
- Fixed a panic that could occur when editing files while the project
diff or branch diff was open.
---------
Co-authored-by: Zed Zippy <234243425+zed-zippy[bot]@users.noreply.github.com>
This change improves performance of project diff in that:
* scrolling in split view for very large diffs (think chromium repo with
`git reset HEAD~1000`) is now very smooth on macOS and fairly smooth on
Linux
* switching from split to unified is very smooth on macOS, and fairly
smooth on Linux
There still remains the case of (severe) hangs when switching from
unified to split however, but it will be addressed in a follow-up PR.
Anyhow, here's the screenshot of the Instruments.app capture of opening
chromium repo in Zed in split view, scrolling a little, moving to
unified, scrolling some more, and moving back to split. Prior to this
change, split -> unified would cause a severe hang, whereas now it's a
hang and thus feels much smoother already (without Instruments profiling
is barely visible). Unified -> split severe hangs are still there but
don't last as long.
<img width="2301" height="374" alt="Screenshot 2026-02-16 at 5 46 23 PM"
src="https://github.com/user-attachments/assets/f687f8d4-cffd-47f1-ada1-f6c4d3ac3cd4"
/>
Release Notes:
- Improved project diff performance when opening very large
diffs/repositories.
Derive collapsed state from `Editor.has_any_buffer_folded` instead of
tracking it separately, removing redundant `ResultsCollapsedChanged` event
and stale `is_collapsed`/`results_collapsed` fields.
Closes#48734
Release Notes:
- Fixed collapse/expand all button in buffer search and project search
not syncing correctly when toggling individual file sections
---------
Signed-off-by: Benjamin <5719034+bnjjj@users.noreply.github.com>
Co-authored-by: dino <dinojoaocosta@gmail.com>
Reverts the whole "project search on type" set of PRs until we figure
out better ways to deal with flickering between search results
appearing.
Release Notes:
- N/A
Closes#47854
Move `disable_ai` from root settings to `ProjectSettingsContent` to
enable per-project AI configuration via `.zed/settings.json`.
- Update settings UI to allow viewing/editing at both user and project
level
- Update editor to check project-level settings for edit predictions and
context menus
- Prevent MCP servers from starting when AI is disabled at project level
Note: SaturatingBool ensures that if user globally disables AI, projects
cannot re-enable it. Projects can only further restrict AI, not grant
it.
Release Notes:
- added support for disabling AI in project settings
---------
Co-authored-by: Ben Kunkle <ben.kunkle@gmail.com>
LSP servers may return symbol names containing newlines. Since outline
panel, breadcrumbs, and project search modal all expect single-line
items, collapse newlines before display.
- Document symbols: collapse newlines to spaces in name
- Workspace symbols: collapse newlines with `↵ ` separator for name and
container_name, preserving visual hint of original structure
Closes #ISSUE
Before you mark this PR as ready for review, make sure that you have:
- [x] Added a solid test coverage and/or screenshots from doing manual
testing
- [x] Done a self-review taking into account security and performance
aspects
- [x] Aligned any UI changes with the [UI
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
Release Notes:
- N/A
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
We had a call to `BlockMap::unfold_intersecting` that ended up
recomputing the entire block map for the RHS _without_ spacers, only to
throw it away in favor of the version with spacers a few lines down. Now
we only sync each block map once in `set_companion`.
Release Notes:
- Improved performance when toggling from the unified diff to the split
diff.
Co-authored-by: Jakub <jakub@zed.dev>
Co-authored-by: Cameron McLoughlin <cameron.studdstreet@gmail.com>
Xin Zhao