Only `CtrlC` and `CtrlBreak` signals are supported. `CtrlLogoff` and
`CtrlShutdown` is service only signal and I have not tried these yet.
`CtrlClose` occurs when terminal window is closed, but I found tokio's
`ctrl_close` does not work well, so I put comment in code.
Release Notes:
- N/A
Fix#8994 and #9844
Release notes:
* Fixed the `t` object in Vim mode not working correctly when cursor was
on a tag. #9844 and #8994
This mr fixes the above two problems, for #9844, because our previous
logic is to only think that the minimum html tag containing the current
cursor is qualified, but the approach of nvim is to get the tag after
the current cursor first, followed by the tag around the current cursor,
so I modified the corresponding condition
For #8994, the situation is a bit more complicated, in our previous
implementation, we could only get the range of the object by a `cursor
position`, but there are two possible cases for the html tag:
When the current cursor length is 1, nvim will return the first tag
after the current cursor, as described above
When the current cursor length is greater than 1, nvim will return just
the smallest tag that can cover the current selection
So we may need to pass the current selection to the inside of the
method, and the point alone is not enough to support us in calculating
these conditions
This PR extracts Zig support into an extension and removes the built-in
Zig support from Zed.
There's a small workaround necessary in order for us to set the file
permissions on the `zls` binary so that it can be run. Eventually we'll
want to build this into the extension API, but for now we're just
hard-coding it on the host side.
Release Notes:
- Removed built-in support for Zig, in favor of making it available as
an extension. The Zig extension will be suggested for download when you
open a `.zig` file.
Release Notes:
- Prevents the terminal from opening on release mode on Windows
Note: this also prevents Zed from logging to the terminal when it is
launched from the terminal. Is this expected behaviour on other
platforms?
---------
Co-authored-by: 白山風露 <shirayama.kazatsuyu@gmail.com>
This PR updates the Gleam extension to give priority to the `gleam`
binary that is already on the PATH before downloading/installing a
separate Gleam version.
Release Notes:
- N/A
The Tab Switcher implementation (#7653):
- `ctrl-tab` opens the Tab Switcher and moves selection to the
previously selcted tab. It also cycles selection forward.
- `ctrl-shift-tab` opens the Tab Switcher and moves selection to the
last tab in the list. It also cycles selection backward.
- Tab is selected and the Tab Switcher is closed on the shortcut
modifier key (`ctrl` by default) release.
- List items are in reverse activation history order.
- The list reacts to the item changes in background (new tab, tab
closed, tab title changed etc.)
Intentionally not in scope of this PR:
- File icons
- Close buttons
I will come back to these features. I think they need to be implemented
in separate PRs, and be synchronized with changes in how tabs are
rendered, to reuse the code as it's done in the current implementation.
The Tab Switcher looks usable even without them.
Known Issues:
Tab Switcher doesn't react to mouse click on a list item. It's not a tab
switcher specific problem, it looks like ctrl-clicks are not handled the
same way in Zed as cmd-clicks. For instance, menu items can be activated
with cmd-click, but don't react to ctrl-click. Since the Tab Switcher's
default keybinding is `ctrl-tab`, the user can only click an item with
`ctrl` pushed down, thus preventing `on_click()` from firing.
fixes#7653, #7321
Release Notes:
- Added Tab Switcher which is accessible via `ctrl-tab` and
`ctrl-shift-tab` (#7653) (#7321)
Related issues:
- Unblocks #7356, I hope 😄
How it looks and works (it's only `ctrl-tab`'s and `ctrl-shift-tab`'s,
no `enter`'s or mouse clicks):
https://github.com/zed-industries/zed/assets/2101250/4ad4ec6a-5314-481b-8b35-7ac85e43eb92
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
This PR fixes a bug that was causing extension telemetry events to not
be reported.
We need to look up the extensions in the new index, as the extensions to
load won't be found in the old index.
Release Notes:
- N/A
After `@vue/language-server` release 2.0, vue lsp doesn't work. I tried
to support 2.0, but since I'm not familiar with `@vue/language-server`
and `zed` I was unsuccessful. To avoid long-term unavailability, I
temporarily fixed the version to 1.8 until we have 2.0 support.
Release Notes:
- Pinned `@vue/language-server` to version `1.8` until Zed supports
`2.x`. ([#9388](https://github.com/zed-industries/zed/issues/9388) &
[#9329](https://github.com/zed-industries/zed/issues/9329)).
---------
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
This adds a keybinding for an existing action. Notably, our bindings for
`Go To Type Definition` and `Go To Implementation` are swapped from
VSCode. We use `cmd` and `shift`, they use `shift` and `cmd`.
Release Notes:
- Added a keybinding for `editor::GoToImplementation`
Earlier versions where a simple find-replace of `cmd` => `ctrl`. In this
PR, I've gone over every keybinding individually and checked them.
Release Notes:
- Removed the `ShowContextMenu` action, it's only usage was in the
collab panel and it's been rebound to `SecondaryConfirm`
This PR extracts Astro support into an extension and removes the
built-in Astro support from Zed.
Release Notes:
- Removed built-in support for Astro, in favor of making it available as
an extension. The Astro extension will be suggested for download when
you open a `.astro` file.
This PR extracts Dockerfile support into an extension and removes the
built-in Dockerfile support from Zed.
There's already an existing [Dockerfile
extension](https://github.com/d1y/dockerfile.zed) that was just missing
language server support. Language server support is being added to that
extension in https://github.com/d1y/dockerfile.zed/pull/2.
Release Notes:
- Removed built-in support for Dockerfile, in favor of making it
available as an extension. The Dockerfile extension will be suggested
for download when you open a `Dockerfile`.
Sharing a project displays a notification (window) on every screen.
Previously there was an issue with the positioning of windows on all
screens except the primary screen.
As you can see here:
Now:
@mikayla-maki and I also decided to refactor the `WindowOptions` a bit.
Previously you could specify bounds which controlled the positioning and
size of the window in the global coordinate space, while also providing
a display id (which screen to show the window on). This can lead to
unusual behavior because you could theoretically specify a global bound
which does not even belong to the display id which was provided.
Therefore we changed the api to this:
```rust
struct WindowOptions {
/// The bounds of the window in screen coordinates
/// None -> inherit, Some(bounds) -> set bounds.
pub bounds: Option<Bounds<DevicePixels>>,
/// The display to create the window on, if this is None,
/// the window will be created on the main display
pub display_id: Option<DisplayId>,
}
```
This lets you specify a display id, which maps to the screen where the
window should be created and bounds relative to the upper left of the
screen.
Release Notes:
- Fixed positioning of popup windows (e.g. when sharing a project) when
using multiple external displays.
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This PR removes a lingering file related to Uiua support.
This file was no longer being referenced after #9085, but just hadn't
been removed.
Release Notes:
- N/A
This PR will fix the following issues that were introduced by the
following pull request #9557.
- Cannot create messages with a mention inside it
- Cannot invite a user
- Cannot accept an invitation
Release Notes:
- Fixed channel chat notifications are not working anymore.
Co-authored-by: Bennet Bo Fenner <53836821+bennetbo@users.noreply.github.com>
This PR fixes some noisy error logs from the `CopilotCompletionProvider`
when Copilot is disabled entirely via the settings.
I have the following in my settings file:
```json
{
"features": {
"copilot": false
},
}
```
After #9777 I started seeing my Zed logs getting filled up with messages
like this:
```
[2024-03-26T14:33:09-04:00 ERROR util] crates/copilot_ui/src/copilot_completion_provider.rs:206: copilot is disabled
```
Release Notes:
- N/A
This PR extracts PureScript support into an extension and removes the
built-in PureScript support from Zed.
Release Notes:
- Removed built-in support for PureScript, in favor of making it
available as an extension. The PureScript extension will be suggested
for download when you open a `.purs` file.
~~This is still a work in progress, but to show the public where I am
working on it~~ Ready for review
TODO:
- [x] Justify fullscreen size to display
- [x] Record and apply restored size
Release Notes:
- N/A
This PR extracts Prisma support into an extension and removes the
built-in Prisma support from Zed.
Release Notes:
- Removed built-in support for Prisma, in favor of making it available
as an extension. The Prisma extension will be suggested for download
when you open a `.prisma` file.
This PR extracts Haskell support into an extension and removes the
built-in Haskell support from Zed.
I tested out the extension locally in a Nix shell using `nix-shell -p
ghc haskell-language-server` to confirm the language server still
operated as expected:
<img width="341" alt="Screenshot 2024-03-26 at 11 26 26 AM"
src="https://github.com/zed-industries/zed/assets/1486634/df16fd38-4046-4a45-ac9f-c2b85bffe5c0">
Release Notes:
- Removed built-in support for Haskell, in favor of making it available
as an extension. The Haskell extension will be suggested for download
when you open a `.hs` file.
This pull request introduces a new `InlineCompletionProvider` trait,
which enables making `Editor` copilot-agnostic and lets us push all the
copilot functionality into the `copilot_ui` module. Long-term, I would
like to merge `copilot` and `copilot_ui`, but right now `project`
depends on `copilot`, which makes this impossible.
The reason for adding this new trait is so that we can experiment with
other inline completion providers and swap them at runtime using config
settings.
Please, note also that we renamed some of the existing copilot actions
to be more agnostic (see release notes below). We still kept the old
actions bound for backwards-compatibility, but we should probably remove
them at some later version.
Also, as a drive-by, we added new methods to the `Global` trait that let
you read or mutate a global directly, e.g.:
```rs
MyGlobal::update(cx, |global, cx| {
});
```
Release Notes:
- Renamed the `copilot::Suggest` action to
`editor::ShowInlineCompletion`
- Renamed the `copilot::NextSuggestion` action to
`editor::NextInlineCompletion`
- Renamed the `copilot::PreviousSuggestion` action to
`editor::PreviousInlineCompletion`
- Renamed the `editor::AcceptPartialCopilotSuggestion` action to
`editor::AcceptPartialInlineCompletion`
---------
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Kyle <kylek@zed.dev>
Co-authored-by: Kyle Kelley <rgbkrk@gmail.com>
This uses the language server settings added in #9293 to allow users to
specify the binary path and arguments with which to start up `gopls`.
Example user settings for `gopls`:
```json
{
"lsp": {
"gopls": {
"binary": {
"path": "/Users/thorstenball/tmp/gopls",
"arguments": ["-debug=0.0.0.0:8080"]
},
}
}
}
```
Constraints:
* Right now this only allows ABSOLUTE paths.
Release Notes:
- Added ability to specify `gopls` binary `path` (must be absolute) and
`arguments` in user settings. Example: `{"lsp": {"gopls": {"binary":
{"path": "/my/abs/path/gopls", "arguments": ["-debug=0.0.0.0:8080"]
}}}}`
