Release Notes:
- Fixed a weird niche interaction between niri and nixos that broke
screensharing
---------
Co-authored-by: Jakub Konka <kubkon@jakubkonka.com>
## Context
Brings in support for the new terminal auth methods. Currently behind
AcpBeta feature flag while the RFD stabilizes
## Self-Review Checklist
<!-- Check before requesting review: -->
- [x] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [x] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable
Release Notes:
- N/A
This PR adjusts the logic that was added in #45166 to just apply to the
specific case of interacting with the command palette in Vim and Helix
modes (hereafter referred to collectively as "Vim mode").
In that PR, we would suppress the auto-save on focus change for _any_
modal in the workspace, regardless of whether we were actually in Vim
mode or not. This would cause issues where moving between files some
other way—such as the tab switcher or the file finder—would cause the
buffers to never be saved.
We now only suppress the auto-save on focus loss behavior when in Vim
mode and the active modal is the command palette. In all other cases, we
save the file.
Closes https://github.com/zed-industries/zed/issues/47968.
Supersedes https://github.com/zed-industries/zed/pull/51801 and
https://github.com/zed-industries/zed/pull/51802.
Note: the way we are identifying the active modal as the command palette
isn't the best, but @bennetbo and I didn't have any other cleaner
solutions. It's a bit tricky, as the logic lives in the `workspace`,
which isn't able to know about the `CommandPalette` due to
`command_palette` depending on `workspace`. There may be some other way
we could achieve this with more indirection, but it's unclear whether it
would be worth it at this time.
Release Notes:
- Changed `{ "autosave": "on_focus_change" }` to now always save on
focus loss, except for when activating the command palette when in
Vim/Helix mode.
Co-authored-by: Bennet Bo Fenner <bennetbo@gmx.de>
Closes#50524
When a file is deleted while project search results are displayed, the
deleted file's buffer was kept alive by the search multibuffer and would
reappear on re-search.
**Root cause:** `Search::into_handle()` treated buffers without a
`project_entry_id()` (which happens when `DiskState::Deleted`) as
"unnamed buffers" and fed them
directly into the search pipeline. The multibuffer's strong
`Entity<Buffer>` reference kept the buffer alive.
**Fix:**
- Filter deleted-file buffers from search candidates in `into_handle()`
and `all_loaded_buffers()`
- Subscribe to `FileHandleChanged` events on the search multibuffer to
proactively remove deleted files from existing results
Before you mark this PR as ready for review, make sure that you have:
- [x] Added a solid test coverage and/or screenshots from doing manual
testing
- [x] Done a self-review taking into account security and performance
aspects
- [ ] Aligned any UI changes with the [UI
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
### Video:
https://drive.google.com/file/d/1pEz6JywFcZlz8aiXbLOxIdj84SQWLIiF/view?usp=sharing
Release Notes:
- Fixed deleted files persisting in project search results
- [x] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [x] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable
Release Notes:
- N/A
* [x] Display original project name as root folder in project panel,
titlebar
* [x] When manually creating worktrees, ensure final path component is
original project name
* [x] Display original project name, worktree name, and branch name in
titlebar
* [x] Only show main checkout in project switcher
Release Notes:
- N/A *or* Added/Fixed/Improved ...
---------
Co-authored-by: Richard Feldman <oss@rtfeldman.com>
- Add `project_panel::undo::UndoManager` with a bounded operation stack
to track and revert project panel operations
- Support undoing file and directory creation, renaming, moving, pasting
and drag-and-drop operations
- Revert batch operations sequentially in reverse order to handle
dependencies between them
- Show an error notification when one or more undo operations fail
- Add "Undo" entry to the project panel context menu, disabled when
there is nothing to undo
- Gate the feature behind the `project-panel-undo-redo` feature flag
Ref: #5039
Release Notes:
- N/A
---------
Signed-off-by: Marco Mihai Condrache <52580954+marcocondrache@users.noreply.github.com>
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: dino <dinojoaocosta@gmail.com>
All of the important changes are in
[`db.rs`](https://github.com/zed-industries/zed/pull/51809/changes#diff-2f644eab943bfa58feec29256281a3d9e8d4d7784cd34783e845af8beb15b16d).
Consider reading the commit log in order to review this work.
The DB crate's macro and API was changed to fix flakiness observed in
the MultiWorkspace tests when run locally. This flakiness was caused by
a shared `static LazyLock`, that caused concurrent test runs to interact
with the same underlying in-memory database. This flakiness wasn't
possible on CI due to it's usage of `cargo nextest`, whose
process-per-test approach masked this problem.
Essentially, I've changed the `static_connection` macro to remove the
static database variable and redone the internal model. Now, all
database types are thin wrappers around a generic `AppDatabase`. The
`AppDatabase` collects all of the individual table's migrations via the
`inventory` crate, and so only runs the migrations once on startup,
rather than a dozen times on startup.
The new API requires a `cx` so that we can replace the database returned
at runtime, rather than relying exclusively on a process-global
thread-local. However, we are still using a `static LazyLock` so that we
only need to take an `&App`, instead of an `&mut App`. These databases
types are `Clone + Send + Sync`, so you can easily capture-and-move the
database into background tasks and other places that don't have a `cx`.
For tests that require database isolation, it is now possible to set
their own database in init. See
[`workspace::init_test`](https://github.com/zed-industries/zed/pull/51809/changes#diff-041673bbd1947a35d45945636c0055429dfc8b5985faf93f8a8a960c9ad31e28R13610),
for the flakiness fix.
Best part, this change should be entirely compiler driven, so the Zed
agent was able to make the app-wide refactor easily.
Before you mark this PR as ready for review, make sure that you have:
- [x] Added a solid test coverage and/or screenshots from doing manual
testing
- [x] Done a self-review taking into account security and performance
aspects
- [x] Aligned any UI changes with the [UI
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
Release Notes:
- N/A
---------
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
This PR updates the pet dependency to incorporate performance
improvements from upstream.
Related Upstream Changes:
- Issue: microsoft/python-environment-tools#369
- PR: microsoft/python-environment-tools#370
Updating pet reduces toolchain discovery time in WSL environments,
specifically when Conda is installed on the host Windows system. In my
testing, the time from clicking the toolchain button to the list
appearing was reduced by approximately 2 seconds.
While this is a notable improvement, discovery in WSL remains slightly
slower than in native development or remote Linux environments, where
toolchains are typically loaded near-instantaneously.
Before you mark this PR as ready for review, make sure that you have:
- [x] Added a solid test coverage and/or screenshots from doing manual
testing (no need)
- [x] Done a self-review taking into account security and performance
aspects
- [x] Aligned any UI changes with the [UI
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
Release Notes:
- Improved python toolchain discovery under WSL environment
- Selection/focus improvements (reduces flickers, move selection more
correctly throughout the list)
- Adds open folder button in the sidebar header
- Fixes sidebar header design, including the thread view one, too
- Fixes behavior of cmd-n when focused in the sidebar
- Changes the design for the "new thread" button in the sidebar and adds
a preview of the prompt on it
- Rename items in the "start thread in" dropdown
Release Notes:
- N/A
---------
Co-authored-by: cameron <cameron.studdstreet@gmail.com>
This PR bumps the version of the GLSL extension to v0.2.2.
Release Notes:
- N/A
Co-authored-by: zed-zippy[bot] <234243425+zed-zippy[bot]@users.noreply.github.com>
Closes#43329
## Summary
This fixes `path:line:column` navigation for files containing non-ASCII
text.
Before this change, open path flows were passing the external column
directly into `go_to_singleton_buffer_point`. That happened to work for
ASCII, but it was wrong for Unicode because external columns are
user-visible character positions while the editor buffer stores columns
as UTF-8 byte offsets.
This PR adds a shared text layer conversion for external row/column
coordinates and uses it in the affected open-path flows:
- file finder navigation
- recent project remote connection navigation
- recent project remote server navigation
It also adds regression coverage for the Unicode case that originally
failed.
As a small - necessary - prerequisite, this also adds
`remote_connection` test support to `file_finder`'s dev-deps so the
local regression test can build and run on this branch. That follows the
same feature mismatch pattern previously fixed in #48280. I wasn't able
to locally verify the tests/etc. w/o the addition... so I've rolled it
into this PR. Tests are green.
The earlier attempt in #47093 was headed in the right direction, but it
did not land and did not include the final regression coverage requested
in review.
## Verification
- `cargo fmt --all -- --check`
- `./script/clippy -p text`
- `./script/clippy -p file_finder`
- `./script/clippy -p recent_projects`
- `cargo test -p file_finder --lib --no-run`
- `cargo test -p file_finder
file_finder_tests::test_row_column_numbers_query_inside_file -- --exact`
- `cargo test -p file_finder
file_finder_tests::test_row_column_numbers_query_inside_unicode_file --
--exact`
- `cargo test -p text
tests::test_point_for_row_and_column_from_external_source -- --exact`
## Manual
I reproduced locally on my machine (macOS) w/ a stateless launch using a
Unicode file (Cyrillic)
Before:
- `:1:5` landed too far left
- `:1:10` landed around the 4th visible Cyrillic character
After:
- `:1:5` lands after 4 visible characters / before the 5th
- `:1:10` lands after 9 visible characters / before the 10th
Release Notes:
- Fixed `path:line:column` navigation so non-ASCII columns land on the
correct character.
---------
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
This PR bumps the version of the HTML extension to v0.3.1.
Release Notes:
- N/A
Co-authored-by: zed-zippy[bot] <234243425+zed-zippy[bot]@users.noreply.github.com>
Closes https://github.com/zed-industries/zed/discussions/49740
Adds optional file and folder icons to the Git panel so its file list is
easier to scan, especially in larger repositories.
- add folder icons for Git panel entries
- add Git panel settings for file and folder icon visibility
---
Release Notes:
- Made the Git Panel aware of icon themes.
- Added the ability to render file type icons in the Git panel.
---------
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Closes#51339
This should address issues with too new libstdc++.so on older/more
conservative distros such as RHEL9.
Release Notes:
- Relaxed requirement for libstdc++.so available on Linux distros.
Closes#46307
Before you mark this PR as ready for review, make sure that you have:
- [ ] Added a solid test coverage and/or screenshots from doing manual
testing
- [X] Done a self-review taking into account security and performance
aspects
- [ ] Aligned any UI changes with the [UI
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
Release Notes:
- Improved compatibility with mounted VHDs on Windows.
---------
Co-authored-by: John Tur <john-tur@outlook.com>
Follow up to https://github.com/zed-industries/zed/pull/51384
This PR fixes the settings UI rendering of this setting by adding a
default value and also wraps it in the feature flag (only the settings
UI rendering), given it's not widely available just yet.
Release Notes:
- N/A
This PR bumps the version of the GLSL extension to v0.2.1.
Release Notes:
- N/A
Co-authored-by: zed-zippy[bot] <234243425+zed-zippy[bot]@users.noreply.github.com>
This will allow us to also use the workflows for this repository, which
will especially come in handy once we revisit provider extensions.
Not perfect, as we will trigger some failed workflows for extensions
that were just added
Release Notes:
- N/A
* [x] Put back persistence of sidebar open state
* [x] when agent panel is docked right, put sidebar on the right side
* [x] remove stale entries from `SidebarsByWindow`
Release Notes:
- N/A
---------
Co-authored-by: Eric Holk <eric@zed.dev>
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
String panics are a non-trivial percentage of the crashes we see at Zed,
and
doubly unfortunately they may incidentally include the contents of a
user's
buffer.
Although this hasn't happened yet (to my knowledge), I don't want to be
in the position of having received sensitive information this way.
See also https://github.com/rust-lang/rust/pull/153677
Release Notes:
- N/A
This PR makes the "Open Project" button in the sidebar also open the
"Recent Projects" popover, while also anchoring that popover to the the
button on the sidebar instead.
Release Notes:
- N/A
This will help with test times (in some cases), as nextest cannot figure
out whether a given rdep is actually an alive edge of the build graph
Closes #ISSUE
Before you mark this PR as ready for review, make sure that you have:
- [ ] Added a solid test coverage and/or screenshots from doing manual
testing
- [ ] Done a self-review taking into account security and performance
aspects
- [ ] Aligned any UI changes with the [UI
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
Release Notes:
- N/A
This adds checks to the extension CLI to ensure that tasks and semantic
token rules are actually valid for the compiled extensions.
Release Notes:
- N/A
- Make clicking on the project header collapse/expand the group as
opposed to activating the workspace
- Added the "threads" label close to the sidebar toggle button
- Made the open folder icon button open the file finder directly as
opposed to the recent projects popover
Release Notes:
- N/A
