Release Notes:
- (Potentially breaking change) Zed will now use the node installed on
your $PATH (if it is more recent than v18) instead of downloading its
own. You can disable the new behavior with `{"node":
{"disable_path_lookup": true}}` in your settings. We do not yet use
system/project-local node_modules.
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
* [x] put this slash command behind a feature flag until we release
embedding access to the general population
* [x] choose a name for this slash command and name the rust module to
match
Release Notes:
- N/A
---------
Co-authored-by: Jason <jason@zed.dev>
Co-authored-by: Richard <richard@zed.dev>
Co-authored-by: Jason Mancuso <7891333+jvmncs@users.noreply.github.com>
Co-authored-by: Richard Feldman <oss@rtfeldman.com>
Release Notes:
- Added a new `assistant.inline_alternatives` setting to configure
additional models that will be used to perform inline assists in
parallel.
---------
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Roy <roy@anthropic.com>
Co-authored-by: Adam <wolffiex@anthropic.com>
Release Notes:
- Added Diagnostic information to inline assistant. This enables users
to just say "Fix this" and have the model know what the errors are.
Some notes:
- You can put the cursor on the start or end line with triple backticks,
it doesn't actually have to be inside the block.
- Placing the cursor outside of a code block does nothing.
- Code blocks are determined by counting triple backticks pairs from
either start or end of buffer, and nothing else.
- If you manually select something, the selection takes precedence over
any code blocks.
Release Notes:
- Added the ability to copy surrounding code blocks in the assistant
panel into the clipboard, or inserting them directly into the editor,
without manually selecting. Place cursor anywhere in a code block
(marked by triple backticks) and use the `assistant::CopyCode` action
(`cmd-k c` / `ctrl-k c`) to copy to the clipboard, or the
`assistant::InsertIntoEditor` action (`cmd-<` / `ctrl-<`) to insert into
editor.
---------
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
Co-authored-by: Bennet <bennet@zed.dev>
This PR adds the ability to display backgrounds for inlay hints within
the editor.
This is controlled by the new `inlay_hints.show_background` setting.
This setting defaults to `false`.
To enable the setting, add the following to your `settings.json`:
```json
{
"inlay_hints": {
"enabled": true,
"show_background": true
}
}
```
When enabled, the inlay hint backgrounds will use the `hint.background`
color from the theme.
| Disabled | Enabled |
|
--------------------------------------------------------------------------------------------------------------------------------------------------
|
--------------------------------------------------------------------------------------------------------------------------------------------------
|
| <img width="1624" alt="Screenshot 2024-09-17 at 4 21 53 PM"
src="https://github.com/user-attachments/assets/5534d09b-1e22-4c6f-9d82-314796ed7d22">
| <img width="1624" alt="Screenshot 2024-09-17 at 4 21 43 PM"
src="https://github.com/user-attachments/assets/6ec58cde-6115-4db4-be95-97c5f2f54b2d">
|
Related issues:
- #12485
- #17392
Release Notes:
- Added an `inlay_hints.show_background` setting to allow displaying
backgrounds for inlay hints in the editor.
- This setting defaults to `false`.
- If enabled, the inlay hint backgrounds will use the `hint.background`
color from the theme.
This PR adds a keybinding for the `editor: rewrap` command.
It is bound to `alt-q`, by default. In Vim mode, it is bound to `g q`.
Release Notes:
- N/A
This fixes the regression introduced here:
https://github.com/zed-industries/zed/pull/17572#issuecomment-2355632615
Essentially: instead of always setting the value when saving settings,
we don't set it by default, but fall back to the default value if it's
not set.
That fixes Vim mode's cursor being overwritten when settings change.
Release Notes:
- N/A
Release Notes:
- Add Python venv activation support for Windows and PowerShell
Additional:
I discovered a related bug on my Windows system. When first opening the
project, it fails to detect the virtual environment folder `.venv`.
After expanding the .venv folder in the Project Panel, it then becomes
able to detect the virtual environment folder. However, I don't know how
to fix it.
This PR does a little bit of a touch-up on the copywriting on the
assistant config UI. I had friends reporting to me that some of the
writing could be clearer, and hopefully, this goes into that direction!
Release Notes:
- N/A
This PR improves adding and working with icons by using the new
`DerivePathStr` to derive icon paths.
This means paths no longer need to be manually specified, and the
`IconName` and file name will always be consistent between icons.
This PR does not do any work to standardize icons visually, remove
unused icons, or any other such cleanup.
Release Notes:
- N/A
This PR pulls non-icon assets out of `ui::components::icon` in
preparation for icon standardization.
In the future icons will have standard names and sizes, and these image
assets won't conform to those constraints.
We can also add a `ui::components::image::Image` wrapper around the
`gpui::img` element in the future for any Zed-specific image styling we
want to enforce.
Of note:
```rust
#[derive(Debug, PartialEq, Eq, Copy, Clone, EnumIter, EnumString, IntoStaticStr, Serialize, Deserialize, DerivePathStr)]
#[strum(serialize_all = "snake_case")]
#[path_str(prefix = "images", suffix = ".svg")]
pub enum VectorName {
ZedLogo,
ZedXCopilot,
}
```
You can see in the above code we no longer need to manually specify
paths for image/icon enums like we currently do in
`ui::components::icon`.
The icon component will get this same treatment in the future, once we:
- do the design work needed to standardize the icons
- remove unused icons
- update icon names
Release Notes:
- N/A
This is a barebones modification of the OpenAI provider code to
accommodate non-streaming completions. This is specifically for the o1
models, which do not support streaming. Tested that this is working by
running a `/workflow` with the following (arbitrarily chosen) settings:
```json
{
"language_models": {
"openai": {
"version": "1",
"available_models": [
{
"name": "o1-preview",
"display_name": "o1-preview",
"max_tokens": 128000,
"max_completion_tokens": 30000
},
{
"name": "o1-mini",
"display_name": "o1-mini",
"max_tokens": 128000,
"max_completion_tokens": 20000
}
]
}
},
}
```
Release Notes:
- Changed `low_speed_timeout_in_seconds` option to `600` for OpenAI
provider to accommodate recent o1 model release.
---------
Co-authored-by: Peter <peter@zed.dev>
Co-authored-by: Bennet <bennet@zed.dev>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Release Notes:
- vim: Added `:diff` and `:revert` (that work with `'<,'>`) to open the
selected diff and revert it.
- vim: Added `d o` to open the diff and `d p` to revert (spiritually
similar to vim's do/dp, though obviously not the same)
- vim: Added `ctrl-p` and `ctrl-n` to summon the autocomplete menu in
insert mode.
This PR adds new SVGs for the pin and unpin icons, using a custom-made
one in a smaller size, and thus removing the `PinAlt` one I added just
recently. I also tweak the outline panel pin icon button tooltip strings
a bit.
Release Notes:
- N/A
- Fixes incorrect shorcuts being displayed in Linux context menus.
- Re-ordering them within the json object doesn't work, but putting them in a dedicate block does.
## Todo
* [x] Parse and present new XML output
* [x] Resolve new edits to buffers and anchor ranges
* [x] Surface resolution errors
* [x] Steps fail to resolve because language hasn't loaded yet
* [x] Treat empty `<symbol>` tag as None
* [x] duplicate assists when editing steps
* [x] step footer blocks can appear *below* the following message header
block
## Release Notes:
- N/A
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Peter <peter@zed.dev>
Co-authored-by: Marshall <marshall@zed.dev>
Co-authored-by: Antonio <antonio@zed.dev>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
In the current `default.json`, `*_font_fallbacks=[]`, which results in
the `fallbacks` value in the `Font` struct always being `Some(...)`.
This PR introduces the following improvements:
1. Changed `*_font_fallbacks = []` to `*_font_fallbacks = null` in
`default.json`.
2. Enhanced the macOS and Windows implementations.
Release Notes:
- N/A
- Improved Sublime keymap: Support for switching to individual tabs with `cmd-1` thru `cmd-9` (MacOS) and `alt-1` thru `alt-9` (Linux) matching Sublime behavior.
Follow-up https://github.com/zed-industries/zed/pull/16085 that fixes
the search deploy to be actually a part of the terminal-related
bindings.
Part of https://github.com/zed-industries/zed/issues/16839
Also
* fixes few other bindings to use `shift` and avoid conflicts with the
existing key bindings.
* adds terminal inline assist to the context menu and makes both the
menu and the button to dynamically adjust to `assist.enabled` settings
change
It is still unclear to me, why certain labels for certain bindings are
wrong (it's still showing `ctrl-w` for closing the terminal tab, and
`shift-insert` instead of `ctrl-shift-v` for Paste, while Insert is near
and has a `ctrl-shift-c` binding shown) but at least the keys work now.
Release notes:
- Improved Linux terminal keymap and context menu
